User's Guide

Press to end the call. If deaccess code was

not preconfigured in the Contacts list, the first line of

the display shows De-Access Code:. The second

line of the display shows a blinking cursor. Enter the

deaccess code and press to proceed. The

radio returns to the previous screen. The DTMF tone

sounds and the display shows Ending Phone Call.

If successful, a tone sounds and the display shows

Phone Call Ended. Your radio returns to the Phone

Call screen. If unsuccessful, your radio returns to the

Phone Call screen. When you press the PTT button

while in the Phone Contacts screen, as tone sounds

and the display shows Press OK to Place Phone

Call. When the telephone user ends the call, a tone

sounds and the display shows Phone Call Ended.

If the call ends while you are entering the extra digits

requested by the Phone Call, your radio returns to

the screen you were on prior to initiating the call.

NOTICE:

The call initiator can press to end the All Call.

4.9.4.4

Receiving All Calls

When you receive an All Call, the following occur:

• A tone sounds.

• The green LED blinks.

• The display shows the Group Call icon at the top right

corner.

• The first text line shows the caller alias ID.

• The second text line displays either All Call, Site

All Call, or Multi Site Call depending on the type

of configuration.

• Your radio unmutes and the incoming call sounds

through the speaker.

The radio returns to the screen before receiving the All Call

when the call ends.

If the Channel Free Indication feature is enabled, you hear

a short alert tone when the transmitting radio releases the

English