User's Guide

PTT button, indicating the channel is free for you to use.
You cannot respond to an All Call.
NOTICE:
The radio stops receiving the All Call if you switch to
a different channel while receiving the call. You are
not able to continue with any menu navigation or
editing until the call ends during an All Call.
4.9.5
Phone Calls
A Phone Call is a call in between an individual radio or a
group of radios and a telephone.
Depending on how the radio is configured, the following
features may or may not be made available:
• Access code
• Dual Tone Multi Frequency (DTMF) tone
• De-access code
• Displaying of caller alias or ID on receiving a phone call
• Ability to reject or accept a phone call
The Phone Call capability can be enabled by assigning and
setting up phone numbers on the system. Check with your
system administrator to determine how your radio has been
programmed.
4.9.5.1
Making Phone Calls
Follow the procedure to make Phone Calls on your radio.
1 Press the programmed One Touch Access button
to the predefined alias or ID.
If the entry for the One Touch Access button is
empty, a negative indicator tone sounds.
If the access code is not preconfigured in the
Contact List, the display shows Access Code:.
2
Enter the access code, and press to proceed.
The access or deaccess code cannot be more than
10 characters.
3 Press the PTT button to respond to the call.
4 Release the PTT button to listen.
English
92