User's Guide

5 Enter extra digits with the keypad if requested by the

call, and press to proceed.

If the call ends while you are entering the extra digits

requested by the call, your radio returns to the

screen you were on before initiating the call.

The DTMF Tone sounds. Your radio returns to the

previous screen.

Press to end the call.

7 Do one of the following:

• If the deaccess code was not preconfigured,

enter the deaccess code when the display shows

De-Access Code:, and press

to proceed.

The radio returns to the previous screen.

• Press the programmed One Touch Access

button. If the entry for the One Touch Access

button is empty, a negative indicator tone sounds.

The DTMF Tone sounds and the display shows

Ending Phone Call.

If the call ends successfully:

• A tone sounds.

• The display shows Call Ended.

If the call fails to end, the radio returns to the Phone

Call screen. Repeat the last two steps or wait for the

telephone user to end the call.

4.9.5.2

Making Phone Calls with the

Programmable Button

Follow the procedure to make Phone Calls with the

programmable button.

1 Press the programmed Phone button to enter into

the Phone Entry list.

Press or to the required alias or ID.

Press

to select.

If the access code was not preconfigured in the

Contacts list, the display shows Access Code:.

English