User's Guide

Enter the access code and press the button to

proceed.

The green LED lights up. The display shows Phone

Call icon, subscriber alias or ID, and call status.

If the call-setup is successful:

• The DTMF tone sounds.

• You hear the call waiting tone of the telephone

user.

• The display shows Phone Call icon, subscriber

alias or ID, Phone Call, and call status.

If call-setup is unsuccessful:

• A tone sounds.

• The display shows Phone Call Failed.

• Your radio returns to the Access Code input

screen. If the access code was preconfigured in

the Contacts list, the radio returns to the screen

you were on prior to initiating the call.

3 Press the PTT button to talk. Release the PTT

button to listen. The RSSI icon disappears during

transmission.

4 To enter extra digits, if requested by the Phone Call.

Do one of the following:

• Press any keypad key to begin the input of the

extra digits. The display shows Extra Digits:

and a blinking cursor. Enter the extra digits and

press the button to proceed. The DTMF

tone sounds and the radio returns to the previous

screen.

• Press One Touch Access button. The DTMF

tone sounds. If the entry for the One Touch

Access button is empty, a negative indicator tone

sounds.

Press to end the call.

If deaccess code was not preconfigured in the

Contacts list, the display shows De-Access Code:.

Enter the deaccess code and press the

button

to proceed.

The DTMF tone sounds and the display shows

Ending Phone Call.

If the end-call-setup is successful, a tone sounds

and the display shows Call Ended.

English