User's Guide

If the end-call-setup is unsuccessful, your radio
returns to the Phone Call screen.
When you press PTT button while in the Phone
Contacts screen, a tone sounds and the display
shows Press OK to Place Call.
When the telephone user ends the call, a tone
sounds and the display shows Phone Call Ended.
If the call ends while you are entering the extra digits
requested by the Phone Call, your radio returns to
the screen you were on prior to initiating the call.
NOTICE:
During channel access, press to
dismiss the call attempt and a tone sounds.
During the call, when you press One Touch
Access button with the deaccess code
preconfigured or enter the deaccess code as
the input for extra digits, your radio attempts
to end the call.
During channel access and access/deaccess
code or extra digits transmission, you radio
responds to On/Offbutton, Volume On/Off
Volume Knob , and Channel Up/Down
Channel Rocker only. A tone sounds for
every invalid input.
4.9.5.3
Making Phone Calls by Using the
Contacts List
Follow the procedure to make Phone Calls on your radio by
using the Contacts list.
English
95