M MOTOTRBO XPRTM 7550 Display Portable User Guide 68009502001-A
Contents This User Guide contains all the information you need to use the MOTOTRBO XPR Series Digital Portable Radios. Declaration of Conformity . . . . . . . . . . . . . . . . . . . . 7 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Important Safety Information . . . . . . . . . . . . . . . . . 10 Product Safety and RF Exposure Compliance . . 10 Software Version . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Computer Software Copyrights . . . . . . . . . . . .
Permanent Monitor . . . . . . . . . . . . . . . . . . . . . . . 35 Making and Receiving Calls . . . . . . . . . . . . . . . . . . 21 Selecting a Site . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Selecting a Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Selecting a Radio Channel, Subscriber ID, or Group ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Receiving and Responding to a Radio Call . . . . . . 23 Receiving and Responding to a Group Call . . . . .
Contents Assigning an Entry to a Programmable Number Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Removing the Association between Entry and Programmable Number Key . . . . . . . . . . . . . . . 52 Setting Default Contact . . . . . . . . . . . . . . . . . . . 53 Call Indicator Settings . . . . . . . . . . . . . . . . . . . . . . 53 Activating and Deactivating Call Ringers for Call Alert 53 Activating and Deactivating Call Ringers for Private Calls . . . . . . . . . . . . . . . . . . . . .
Stopping an Automatic Site Search . . . . . . . . . . . 86 Starting a Manual Site Search . . . . . . . . . . . . . . . 87 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Radio Disable . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Radio Enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Lone Worker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Password Lock Features . . . . . . . . . . . . . . . . . . . .
Contents 6 English Changing the Display Mode . . . . . . . . . . . . . . . . 99 Adjusting the Display Brightness . . . . . . . . . . . . 99 Controlling the Display Backlight . . . . . . . . . . . 100 Setting the Squelch Level . . . . . . . . . . . . . . . . 100 Turning the Introduction Screen On or Off . . . . 101 Locking and Unlocking the Keypad . . . . . . . . . . 101 Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Turning the LED Indicator On or Off . . . . . . . . .
Declaration of Conformity DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola Solutions, Inc. Address: 1303 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A. Phone Number: 1-800-927-2744 Declaration of Conformity This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below. Hereby declares that the product: Model Name: XPR 7550 conforms to the following regulations: FCC Part 15, subpart B, section 15.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Notes Notes 9 English
Important Safety Information Software Version Product Safety and RF Exposure Compliance All the features described in the following sections are supported by the radio's software version R02.00.00. Important Safety Information Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio. ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements.
Computer Software Copyrights This voice coding Technology is licensed solely for use within this Communications Equipment. The user of this Technology is explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-readable form. U.S. Pat. Nos. #5,870,405, #5,826,222, #5,754,974, #5,701,390, #5,715,365, #5,649,050, #5,630,011, #5,581,656, #5,517,511, #5,491,772, #5,247,579, #5,226,084 and #5,195,166.
Handling Precautions The MOTOTRBO Series Digital Portable radio meets IP57 specifications, allowing the radio to withstand adverse field conditions such as being submersed in water. • If the radio has been submersed in water, shake the radio well to remove any water that may be trapped inside the speaker grille and microphone port. Trapped water could cause decreased audio performance.
Notes Notes 13 English
Notes 14 English
Getting Started How to Use This Guide This User Guide covers the basic operation of the MOTOTRBO Portables. However, your dealer or system administrator may have customized your radio for your specific needs. Check with your dealer or system administrator for more information.
Charging the Battery Preparing Your Radio for Use Preparing Your Radio for Use Assemble your radio by following these steps: Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching the Antenna. . . . . . . . . . . . . . . . . . . . . . . . . . Attaching the Belt Clip. . . . . . . . . . . . . . . . . . . . . . . . . . Attaching the Universal Connector Cover (Dust Cover) . . . . . . . . . . . . . . . . .
Attaching the Battery Attaching the Antenna To remove the battery, turn the radio off. Move the battery latch into unlock position and hold, and slide the battery down and off the rails. With the radio turned off, set the antenna in its receptacle and turn clockwise. To remove the antenna, turn the antenna counterclockwise. Preparing Your Radio for Use Align the battery with the rails on the back of the radio. Press the battery firmly, and slide upward until the latch snaps into place.
Attaching the Belt Clip Preparing Your Radio for Use Align the grooves on the clip with those on the battery and press downward until you hear a click. To remove the clip, press the belt clip tab away from the battery. Using a key may be helpful. Then slide the clip upward and away from the radio. 4 English Attaching the Universal Connector Cover (Dust Cover) The universal connector is located on the antenna side of the radio. It is used to connect MOTOTRBO accessories to the radio.
Powering Up the Radio The LED lights up solid green and the Home screen lights up if the backlight setting is set to turn on automatically. A brief tone sounds, indicating that the power up test is successful. NOTE: There is no power up tone if the radio tones/alerts function is disabled (see Turning the Radio Tones/ Alerts On or Off on page 96). LED If your radio does not power up, check your battery. Make sure that it is charged and properly attached.
Adjusting the Volume To increase the volume, turn the On/Off/Volume Control Knob clockwise. Identifying Radio Controls To decrease the volume, turn this knob counterclockwise. NOTE: Your radio can be programmed to have a minimum volume offset where the volume level cannot be turned down fully. Check with your dealer or system administrator for more information. 6 English Identifying Radio Controls Take a moment to review the following: Radio Controls . . . . . . . . . . . . . . . . . . . . . . . . . . .
Radio Controls 4 Side Button 1* 5 Push-to-Talk (PTT) Button 6 Side Button 2* 1 2 18 7 Side Button 3* 3 17 8 Front Button P1* 16 4 9 Menu/OK Button 10 4-Way Navigation Button 5 15 14 6 13 12 Back/Home Button 7 12 13 Front Button P2* 8 11 9 11 Keypad 14 Display 15 Microphone 16 Speaker 10 17 Universal Connector for Accessories 1 Channel Selector Knob 18 Emergency Button* 2 On/Off/Volume Control Knob 19 Antenna 3 LED Indicator Identifying Radio Controls 19 * These buttons are p
Programmable Buttons Your dealer can program the programmable buttons as shortcuts to radio functions or preset channels/groups depending on the duration of a button press: • Short press – Pressing and releasing rapidly. • Long press – Pressing and holding for the programmed duration. Identifying Radio Controls • Hold down – Keeping the button pressed. NOTE: The programmed duration of a button press is applicable for all assignable radio/utility functions or settings.
Monitor – Monitors a selected channel for activity. One Touch Access – Directly initiates a predefined Private or Group Call, a Call Alert or a Quick Text message. Scan* – Toggles scan on or off. Site Lock On/Off* off. – Toggles the automatic site roam on or Status – Selects the status list menu. Option Board Feature – Toggles option board feature(s) on or off for option board-enabled channels. Telemetry Control remote radio.
Assignable Settings or Utility Functions Using the 4-Way Navigation Button All Tones/Alerts – Toggles all tones and alerts on or off. You can use the 4-way navigation button, e, to scroll through Backlight On/Off – Toggles display backlight on or off. options, increase/decrease values, and navigate vertically. Backlight Brightness – Adjusts the brightness level. Category ^ or v < or > Keypad Lock – Toggles keypad between locked and unlocked.
Accessing the Programmed Functions • A short or long press of the relevant programmable buttons. OR ed c • Use the 4-way navigation button as follows: 1 To access the menu, press the c button. Press the appropriate direction of the e to access the menu functions. 2 To select a function or enter a sub-menu, press the c button.
Using the Keypad You can use the 3 x 4 alphanumeric keypad to access your radio’s features. You can use the keypad to enter subscriber aliases or IDs, and text messages. Many characters require that you press a key multiple times. The table below shows the number of times a key needs to be pressed to generate the required character. Identifying Radio Controls Number of Times Key is Pressed 12 Key 1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 8 9 0 * # 1 .
Push-To-Talk (PTT) Button or Off on page 98) or the PTT Sidetone is enabled, wait until the short alert tone ends before talking. During a call, if the Channel Free Indication feature is enabled on your radio (programmed by your dealer), you will hear a short alert tone the moment the target radio (the radio that is receiving your call) releases the PTT button, indicating the channel is free for you to respond.
Switching Between Conventional Analog and Digital Mode Each channel in your radio can be configured as a conventional analog or conventional digital channel. Use the Channel Selector Knob to switch between an analog or a digital channel. Identifying Radio Controls Channel Selector Knob Capacity Plus Capacity Plus is a single-site trunking configuration of the MOTOTRBO radio system, which uses a pool of channels to support hundreds of users and up to 254 Groups.
Identifying Status Indicators The 132 x 90 pixels, 256 colors, liquid crystal display (LCD) of your radio shows radio status, text entries, and menu entries. The following are icons that appear on the status bar at the top of the radio’s display. Icons are displayed on the status bar, arranged left-to-right, in order of appearance/usage. Received Signal Strength Indicator (RSSI) The number of bars displayed represents the radio signal strength. Four bars indicate the strongest signal.
Notification Notification list is not empty. GPS Available The GPS feature is enabled. The icon stays lit when a position fix is available. Scan* Scan feature is enabled. GPS Not Available/Out of Range The GPS feature is enabled but is not receiving data from the satellite. Identifying Status Indicators Scan – Priority 1* Radio detects activity on channel/group designated as Priority 1). 16 English Option Board The Option Board is enabled.
Call Icons Private Call Indicates a Private Call in progress. In the Contacts list, it indicates a subscriber alias (name) or ID (number). Group Call/All Call Indicates a Group Call or All Call in progress. In the Contacts list, it indicates a group alias (name) or ID (number). The following icons appear beside menu items that offer a choice between two options or as an indication that there is a sub-menu offering two options. Checkbox (Empty) Indicates the option is not selected.
Mini Notice Icons The following icons appear momentarily on the radio’s display after an action to perform task is taken. Identifying Status Indicators Successful Transmission (Positive) Successful action taken. 18 English Sent Item Icons The following icons appear in the Sent Items folder. OR Sent Successfully The text message is sent successfully. OR Send Failed The text message cannot be sent. Failed Transmission (Negative) Failed action taken.
LED Indicator LED Indicator Double blinking yellow – Radio is no longer connected to the repeater while in Capacity Plus, all Capacity Plus channels are currently busy, Auto Roaming is enabled, radio is actively searching for a new site. Also indicates radio has yet to respond to a group call alert, or radio is locked. NOTE: While in conventional mode, when the LED blinks green, it indicates the radio detects activity over the air.
Audio Tones Alert tones provide you with audible indications of the radio’s status or the radio’s response to data received. Continuous Tone A monotone sound. Sounds continuously until termination. Identifying Status Indicators Periodic Tone Repetitive Tone Sounds periodically depending on the duration set by the radio. Tone starts, stops, and repeats itself. A single tone that repeats itself until it is terminated by the user.
Making and Receiving Calls Use this navigation guide to familiarize yourself with the basic Call features: Selecting a Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 21 Selecting a Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 21 Selecting a Radio Channel, Subscriber ID, or Group ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 23 Receiving and Responding to a Radio Call . . . . . . . . . page 23 Making a Radio Call . . . . . . . . . . . . .
4 ^ or v to the required zone and proceed to Step 7. OR Key in the first character of the required zone. Selecting a Radio Channel, Subscriber ID, or Group ID 5 A blinking cursor appears. Use the keypad to type the required zone. Press < to move one space to the left. Making and Receiving Calls Press > to move one space to the right. Press the *DEL key to delete any unwanted characters. 6 The first line of the display shows the characters you keyed in.
Receiving and Responding to a Radio Call LED Indicator To receive a call from a group of users, your radio must be configured as part of that group. Procedure: When you receive a Group Call (while on the Home screen): The LED lights up solid green while the radio is transmitting and blinks green when the radio is receiving. 1 The LED blinks green. NOTE: The LED lights up solid green while the radio is transmitting and double blinks green when the radio is receiving a privacy-enabled call.
5 The LED lights up solid green. Receiving and Responding to a Private Call 6 Wait for the Talk Permit Tone to finish (if enabled) and speak A Private Call is a call from an individual radio to another individual radio. clearly into the microphone. OR Making and Receiving Calls Wait for the PTT Sidetone to finish (if enabled) and speak clearly into the microphone. There are two types of Private Calls.
4 If the Channel Free Indication feature is enabled, you will 5 The LED lights up solid green. 6 Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the microphone. 7 Release the PTT button to listen. 8 If there is no voice activity for a predetermined period of time, the call ends. 9 You hear a short tone. The display shows Call Ended. See Making a Private Call on page 28 for details on making a Private Call.
Receiving and Responding to a Selective Call A Selective Call is a call from an individual radio to another individual radio. It is a Private Call on an analog system. Procedure: When you receive a Selective Call: 1 The LED blinks green. Making and Receiving Calls 2 The Private Call icon appears in the top right corner. The first text line shows the caller alias or Selective Call or Alert with Call. 3 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
Making a Radio Call Making a Call with the Channel Selector Knob Making a Group Call • The Channel Selector Knob To make a call to a group of users, your radio must be configured as part of that group.
6 If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the target radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. OR If there is no voice activity for a predetermined period of time, the call ends. 7 Radio returns to the screen you were on prior to initiating the Making and Receiving Calls call. You can also make a Group Call via Contacts (see Making a Group Call from Contacts on page 48).
4 Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the microphone. responds, the LED blinks green. 6 If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the target radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. OR If there is no voice activity for a predetermined period of time, the call ends. 7 You hear a short tone. The display shows Call Ended.
Making a Selective Call Just like a Private Call, while you can receive and/or respond to a Selective Call initiated by an authorized individual radio, your radio must be programmed for you to initiate a Selective Call. Procedure: 1 Turn the Channel Selector Knob to select the channel with Making and Receiving Calls the active subscriber alias or ID. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to make the call. The LED lights up solid green.
Making a Group or Private Call with the One Touch Access Button You can ONLY have one alias or ID assigned to a One Touch Access button. Your radio can have multiple One Touch Access buttons programmed. Procedure: 1 Press the programmed One Touch Access button to make a Group or Private Call to the predefined alias or ID. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to make the call. The LED lights up solid green.
Making a Group, Private or All Call with the Programmable Number Key Making and Receiving Calls The Programmable Number Key feature allows you to make a Group, Private or All Call to a predefined alias or ID easily. This feature can be assigned to all the available number keys on a keypad. You can ONLY have one alias or ID assigned to a number key, but you can have more than one number key associated to an alias or ID.
Stopping a Radio Call You can continue to communicate when your repeater is not operating, or when your radio is out of the repeater’s range but within talking range of other radios. This is called “talkaround”. Your radio must be programmed to allow you to use this feature. Procedure: While on the required channel: NOTE: This feature is not applicable in Capacity Plus. 2 The display shows Remote Dekey.
6 The screen automatically returns to the previous menu. Monitoring Features The Talkaround setting is retained even after powering down. NOTE: At Step 4, you can also use < or > to change the selected option. Monitoring a Channel Use the Monitor feature to make sure a channel is clear before transmitting. NOTE: This feature is not applicable in Capacity Plus. Making and Receiving Calls Procedure: 34 English 1 Press and hold the programmed Monitor button and listen for activity.
Permanent Monitor NOTE: This feature is not applicable in Capacity Plus. Procedure: 1 Press the programmed Permanent Monitor button. 2 Radio sounds an alert tone, the LED lights up solid yellow, and the display shows Permanent Monitor On. The monitor icon appears on the status bar. 3 Press the programmed Permanent Monitor button to exit Permanent Monitor mode. 4 Radio sounds an alert tone, the LED turns off, and display shows Permanent Monitor Off.
Advanced Features Advanced Features 36 Use this navigation guide to learn more about advanced features available with your radio: Radio Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 37 Remote Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 38 Scan Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 40 Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 44 Vote Scan . . . . . . . . . . . . . .
Radio Check 5 If successful, a positive indicator tone sounds and the If enabled, this feature allows you to determine if another radio is active in a system without disturbing the user of that radio. No audible or visual notification is shown on the target radio. This feature is only applicable for subscriber aliases or IDs. 6 Radio returns to the subscriber alias or ID screen. Sending a Radio Check OR Procedure: Use the programmed Radio Check button. Procedure: Use the menu.
5 The display shows transitional mini notice, indicating the request is in progress. The LED lights up solid green. 6 Wait for acknowledgement. 7 If successful, a positive indicator tone sounds and the display shows positive mini notice. OR If unsuccessful, a negative indicator tone sounds and the display shows negative mini notice. 8 Radio returns to the subscriber alias or ID screen.
If unsuccessful, a negative indicator tone sounds and the display shows negative mini notice. Procedure: Use the menu. 1 c to access the menu. 2 ^ or v to Contacts and press c to select. 3 ^ or v to the required subscriber alias or ID and press c to select. OR ^ or v to Manual Dial and press c to select. If there was previously dialed ID, the ID appears along with display shows positive mini notice. Your radio starts playing audio from the monitored radio for a programmed duration and display shows Rem.
Stopping Remote Monitor Remote Monitor automatically stops after a programmed duration or when there is any user operation on the target radio. Procedure: 1 Press the programmed Transmit Interrupt Remote Dekey button. 2 The display shows transitional mini notice, indicating the request is in progress. The LED lights up solid green. 3 Wait for acknowledgment. Advanced Features 4 If successful, a positive indicator tone sounds and the display shows positive mini notice.
Editing the Scan List There is no priority icon if priority is set to None. Adding a New Entry to the Scan List Viewing an Entry in the Scan List by Alias Search Procedure: Procedure: 1 c to access the menu. 1 c to access the menu. 2 ^ or v to Scan and press c to select. 2 ^ or v to Scan and press c to select. 3 ^ or v to Scan List and press c to select. 3 ^ or v to Scan List and press c to select. 4 ^ or v to Add Member and press c to select.
8 Press c to select. Deleting an Entry from the Scan List 9 ^ or v to the required priority level and press c to select. Procedure: 10 The display shows positive mini notice, followed immediately by Add Another?. 11 ^ or v to Yes and press c to select, to add another entry, and repeat Steps 5 to 9. OR ^ or v to No and press c to select to save the current list. 1 c to access the menu. 2 ^ or v to Scan and press c to select. 3 ^ or v to Scan List and press c to select.
9 At Delete Entry?, ^ or v to Yes and press c to select, ^ or v to No and press c to select to return to the previous screen. 10 Repeat Steps 4 to 9 to delete other entries. After deleting all required aliases or IDs, long press d to return to the Home screen. Setting and Editing Priority for an Entry in the Scan List Procedure: 1 c to access the menu. 2 ^ or v to Scan and press c to select. 3 ^ or v to Scan List and press c to select. 4 ^ or v to the required alias or ID and proceed to Step 7.
7 Press c to select. 8 ^ or v to Edit Priority and press c to select. 9 ^ or v to the required priority level and press c to select. 10 The display shows positive mini notice before returning to the previous screen. 11 The priority icon appears left of the member’s name. There is no priority icon if priority is set to None. Scan When you start a scan, your radio cycles through the programmed scan list for the current channel looking for voice activity.
Responding to a Transmission During a Scan Procedure: Press the programmed Scan button to start or stop Scan. OR Follow the procedure below. During scanning, your radio stops on a channel/group where activity is detected. The radio stays on that channel for a programmed time period known as “hang time”. 1 Use the Channel Selector Knob to select a channel programmed with a scan list. 2 c to access the menu. 3 ^ or v to Scan and press c to select. 4 ^ or v to Scan State and press c to select.
Deleting a Nuisance Channel Restoring a Nuisance Channel If a channel continually generates unwanted calls or noise (termed a “nuisance” channel), you can temporarily remove the unwanted channel from the scan list. Procedure: To restore the deleted nuisance channel, do one of the following: This capability does not apply to the channel designated as the Selected Channel.
Vote Scan Contacts Settings Contacts provides “address-book” capabilities on your radio. Each entry corresponds to an alias or ID that you use to initiate a call. Your radio scans analog channels of multiple base stations and performs a voting process to select the strongest received signal. Once that is established, your radio unmutes to transmissions from that base station.
Your radio supports two Contacts lists, one for Analog contacts and one for Digital contacts, with a maximum of 500 members for each Contacts list. Each entry within Contacts displays the following information: • Call Type • Call Alias • Call ID Advanced Features NOTE: You can add, or edit subscriber IDs for the Digital Contacts list. Deleting subscriber IDs can only be performed by your dealer.
Making a Private Call from Contacts solid green. The display shows the destination alias. 1 c to access the menu. 6 Wait for the Talk Permit Tone to finish (if enabled) and speak 2 ^ or v to Contacts and press c to select.The entries 7 Release the PTT button to listen. When the target radio are alphabetically sorted. 3 ^ or v to the required subscriber alias or ID. OR ^ or v to Manual Dial and press c to select.
Making a Call by Alias Search 7 Press the PTT button to make the call. The LED lights up You can also use alias or alphanumeric search to retrieve the required subscriber alias. 8 Wait for the Talk Permit Tone to finish (if enabled) and speak This feature is only applicable while in Contacts. Procedure: 1 c to access the menu. 2 ^ or v to Contacts and press c to select. The entries are alphabetically sorted. 3 Key in the first character of the required alias.
NOTE: Press d button or c to exit alias search. Your radio may be programmed to perform a radio presence check prior to setting up the Private Call. If the target radio is not available, you hear a short tone and see negative mini notice on the display. The radio returns to the menu prior to initiating the radio presence check. Number Key Procedure: 1 c to access the menu. 2 ^ or v to Contacts and press c to select. The entries are alphabetically sorted.
NOTE: Each entry can be associated to different number keys. You see a checkmark before each number key that is assigned to an entry. If the checkmark is before Empty, you have not assign a number key to the entry. If a number key is assigned to an entry in a particular mode, this feature is not supported when you long press the number key in another mode.
Setting Default Contact Call Indicator Settings Follow the procedure below. 1 c to access the menu. Activating and Deactivating Call Ringers for Call Alert 2 ^ or v to Contacts and press c to select. You can select, or turn on or off ringing tones for a received Call Alert. 3 ^ or v to the required alias or ID and press c to select. Procedure: 4 ^ or v to Set as Default and press c to select. 1 c to access the menu.
Activating and Deactivating Call Ringers for Advanced Features Private Calls Activating and Deactivating Call Ringers for Selective Call You can turn on or off the ringing tones for a received Private Call. You can select, or turn on or off ringing tones for a received Selective Call. Procedure: Procedure: 1 c to access the menu. 1 c to access the menu. 2 ^ or v to Utilities and press c to select. 2 ^ or v to Utilities and press c to select. 3 ^ or v to Radio Settings and press c to select.
Activating and Deactivating Call Ringers for Text Message Activating and Deactivating Call Ringers for Telemetry Status with Text You can turn on or off the alert tones for a received Telemetry Status with Text. Procedure: Procedure: 1 c to access the menu. 1 c to access the menu. 2 ^ or v to Utilities and press c to select. 2 ^ or v to Utilities and press c to select. 3 ^ or v to Radio Settings and press c to select. 3 ^ or v to Radio Settings and press c to select.
Assigning Ring Styles Escalating Alarm Tone Volume You can program your radio to sound one of ten predefined ringing tones when receiving a Call Alert or a Text Message from a particular contact. You can program your radio to continually alert you when a radio call remains unanswered. This is done by automatically increasing the alarm tone volume over time. This feature is known as Escalert. Procedure: 1 c to access the menu. 2 ^ or v to Contacts and press c to select.
Call Log Features You can perform the following tasks in each of your call lists: • Store ID to Contacts Procedure: 1 c to access the menu. 2 ^ or v to Call Log and press c to select. 3 ^ or v to the required list and press c to select. • Delete 4 ^ or v to the required alias or ID and press c to select. • View Details 5 ^ or v to Store and press c to select. Viewing Recent Calls The lists are Missed, Answered, and Outgoing. Procedure: 1 c to access the menu. 6 A blinking cursor appears.
Deleting a Call from a Call List Viewing Details from a Call List Procedure: Procedure: 1 c to access the menu. 1 c to access the menu. 2 ^ or v to Call Log and press c to select. 2 ^ or v to Call Log and press c to select. 3 ^ or v to the required list and press c to select. 3 ^ or v to the required list and press c to select. 4 ^ or v to the required alias or ID and press c to select. 4 ^ or v to the required alias or ID and press c to select. 5 ^ or v to Delete and press c to select.
Call Alert Operation This feature is applicable for subscriber aliases or IDs only and is accessible through the menu via Contacts or manual dial. Receiving and Responding to a Call Alert When you receive a Call Alert page, you see the notification list listing a Call Alert with the alias or ID of the calling radio on the display. Procedure: Procedure: 1 c to access the menu. 2 ^ or v to Contacts and press c to select. 3 ^ or v to the required subscriber alias or ID and press c to select.
Making a Call Alert with the One Touch Access Emergency Operation Button Procedure: 1 Press the programmed One Touch Access button to make a Call Alert to the predefined alias or ID. 2 The display shows Call Alert and the subscriber alias or ID, indicating that the Call Alert has been sent. 3 The LED lights up solid green when your radio is sending the Call Alert. Advanced Features 4 If the Call Alert acknowledgement is received, the display shows positive mini notice.
In addition, each alarm has the following types: • Regular – Radio transmits an alarm signal and shows audio To revisit the Alarm List, press c to access the menu and select Alarm List. • Silent – Radio transmits an alarm signal without any audio or visual indicators. Radio receives calls without any sound through the radio’s speaker, until you press the PTT button to initiate the call.
Responding to an Emergency Alarm Procedure: When receiving an Emergency Alarm: 1 In the Alarm List, ^ or v to the required alias. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is now available for use.
Sending an Emergency Alarm with Call This feature allows you to send an Emergency Alarm, a non-voice signal, which triggers an alert indication on a group of radios. This feature allows you to send an Emergency Alarm to a group of radios. Upon acknowledgement by a radio within the group, the group of radios can communicate over a programmed Emergency channel. Procedure: 1 Press the programmed Emergency On button. 2 The display shows Tx Alarm and the destination alias.
7 Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the microphone. OR Wait for the PTT Sidetone to finish (if enabled) and speak clearly into the microphone. 8 Release the PTT button to listen. When you receive a group call, the display shows the caller alias and group alias. Advanced Features 9 When the channel is free for you to respond, a short alert tone sounds ( if the Channel Free Indication feature is enabled). Press the PTT button to respond.
automatically transmits without a PTT press until the hot mic duration expires. Emergency icon appears. 5 Once the hot mic duration expires, the radio automatically stops transmitting. To transmit again, press the PTT button. 6 Press Emergency Off button to exit the Emergency mode. 7 The radio returns to the Home screen.
Exiting Emergency Mode NOTE: This feature is only applicable to the radio sending the Emergency Alarm. Your radio exits Emergency mode when one of the following occurs: • Emergency Alarm acknowledgement is received (for Emergency Alarm only), OR • An Emergency Exit Telegram is received, OR • All retries to send the alarm have been exhausted, OR Advanced Features • The Emergency Off button is pressed. NOTE: If your radio is powered off, it exits the Emergency mode.
Text Message Features Your radio is able to receive data, for example a text message, from another radio or an e-mail application. The maximum length of characters for a text message, including the subject line (seen when receiving message from an e-mail application), is 280. The radio exits the current screen once the inactivity timer expires. Any text message in the writing/editing screen will automatically be saved to the Drafts folder. NOTE: Long press d at any time to return to the Home screen.
If the text message fails to send, the radio returns you to the Resend option screen (see Managing Fail-to-Send Text Messages on page 71). Sending a Quick Text Message 6 Press c once message is composed. 7 ^ or v to the required alias or ID and press c to select. OR ^ or v to Manual Dial and press c to select. Your radio supports a maximum of 50 Quick Text messages as programmed by your dealer. Key in the subscriber alias or ID and press c.
Sending a Quick Text Message with the One Touch Access Button Procedure: 1 Press the programmed One Touch Access button to send a predefined Quick Text message to a predefined alias or ID. 2 The display shows transitional mini notice, confirming your message is being sent. 3 If the message is sent, a tone sounds and the display shows positive mini notice. OR If the message is not sent, a low tone sounds and the display shows negative mini notice.
Viewing a Saved Text Message Editing and Sending a Saved Text Message Procedure: Press the programmed Text Message button and proceed to Step 3. OR Follow the procedure below. Procedure: 1 c to access the menu. 2 ^ or v to Messages and press c to select. 3 ^ or v to Drafts and press c to select. 4 ^ or v to the required message and press c to select. 1 Press c again while viewing the message. 2 ^ or v to Edit and press c to select. A blinking cursor appears. Use the keypad to edit your message.
5 If the message is sent, a tone sounds and the display shows positive mini notice. OR If the message is not sent, a low tone sounds and the display shows negative mini notice. Managing Fail-to-Send Text Messages You can select one of the following options while at the Resend option screen: • Resend If the text message fails to send, it is moved to the Sent Items folder and marked with a Send Failed icon. • Forward Deleting a Saved Text Message from Drafts NOTE: If the channel type (i.e.
Forwarding a Text Message Editing a Text Message Select Forward to send the message to another subscriber/ group alias or ID. Select Edit to edit the message before sending it. Procedure: NOTE: If a subject line is present (for messages received from an e-mail application), you cannot edit it. 1 ^ or v to Forward and press c to select. Procedure: 2 ^ or v to the required alias or ID and press c to select. 1 ^ or v to Edit and press c to select. OR ^ or v to Manual Dial and press c to select.
5 ^ or v to the required alias or ID and press c to select. OR ^ or v to Manual Dial and press c to select. Key in the subscriber ID and press c. 6 The display shows transitional mini notice, confirming your message is being sent. 7 If the message is sent, a tone sounds and the display shows positive mini notice. OR If the message is not sent, a low tone sounds and the display shows negative mini notice. Managing Sent Text Messages Once a message is sent to another radio, it is saved in Sent Items.
Viewing a Sent Text Message Sending a Sent Text Message Procedure: Press the programmed Text Message button and proceed to Step 3. OR Follow the procedure below. You can select one of the following options while viewing a sent text message: 1 c to access the menu. • Edit 2 ^ or v to Messages and press c to select. • Delete 3 ^ or v to Sent Items and press c to select. NOTE: If the channel type (i.e.
If the message fails to send, the radio returns you to the Resend option screen. Press c to resend the message to the same subscriber/group alias or ID. NOTE: Changing the volume, and pressing any button, except for c, <, or >, returns you to the message. The radio exits the Resend option screen if you press the PTT button to initiate a Private or Group Call, or to respond to a Group Call.
^ or v to No and press c to return to the previous Receiving a Text Message screen. When your radio receives a message, the display shows the Notification List with the alias or ID of the sender and the message icon . When you select Sent Items and it contains no text messages, the display shows List Empty, and sounds a low tone if Keypad Tones are turned on (see Turning Keypad Tones On or Off on page 97).
Press ^ or v to access the Read Later or Delete option screen: Procedure: • Select Read Later to return to the screen you were on prior 1 c to access the menu. to receiving the text message. • Select Delete to delete the text message. Managing Received Text Messages Use the Inbox to manage your text messages. The Inbox is capable of storing a maximum of 30 messages.
4 ^ or v to the required message and press c to select. 5 The display shows Telemetry: . 6 Long press d to return to the Home screen. You cannot reply to a Telemetry Status text message. Replying to a Text Message from the Inbox Procedure: Press the programmed Text Message button and proceed to Step 3. OR Follow the procedure below. 1 c to access the menu. 2 ^ or v to Messages and press c to select. 3 ^ or v to Inbox and press c to select.
Deleting a Text Message from the Inbox Deleting All Text Messages from the Inbox Procedure: Press the programmed Text Message button and proceed to Step 3. OR Follow the procedure below. Procedure: Press the programmed Text Message button and proceed to Step 3. OR Follow the procedure below. 1 c to access the menu. 1 c to access the menu. 2 ^ or v to Messages and press c to select. 2 ^ or v to Messages and press c to select. 3 ^ or v to Inbox and press c to select.
Analog Message Encode Your radio is able to send preprogrammed messages from the Message list to a radio alias or to the dispatcher. Sending MDC Message Encode to Dispatcher Procedure: 1 ^ or v to Message and press c to select. 2 ^ or v to Quick Text and press c to select. 3 ^ or v to the required message. Press c to send. 4 The display shows transitional mini notice, confirming your message is being sent. 5 If the message is sent, a tone sounds and the display shows positive mini notice.
Analog Status Update For 5-Tone systems, see Setting Default Contact on page 53 for details on setting the default contact. Your radio is able to send preprogrammed messages from the Status List indicating your current activity to a radio contact (for 5-Tone systems) or to the dispatcher (for MDC systems). For 5-Tone systems, a PTT button press while in the status list sends the selected status update and returns to the Home screen to initiate a voice call.
Press the *DEL key to delete any unwanted characters. Press c once editing is complete. 5 The display shows Status Saved. 6 Radio returns to Status List. Privacy If enabled, this feature helps to prevent eavesdropping by unauthorized users on a channel by the use of a softwarebased scrambling solution. The signaling and user identification portions of a transmission are not scrambled.
The LED lights up solid green while the radio is transmitting and double blinks green when the radio is receiving an ongoing privacy-enabled transmission. If the radio has a privacy type assigned, the secure or unsecure icon appears on the status bar, except when the radio is sending or receiving an Emergency call or alarm. NOTE: Some radio models may not offer this Privacy feature. Check with your dealer or system administrator for more information.
Dual Tone Multi Frequency (DTMF) IP Site Connect The Dual Tone Multi Frequency (DTMF) feature allows the radio to operate in a radio system with an interface to telephone systems. This feature allows your radio to extend communication beyond the reach of a single site, by connecting to different available sites via an Internet Protocol (IP) network. Procedure: NOTE: This feature is not applicable in Capacity Plus. To initiate a DTMF call.
A Members list supports a maximum of 16 channels (including the Selected Channel). NOTE: You cannot manually add or delete an entry to the Members list. Check with your dealer or system administrator for more information. Starting an Automatic Site Search NOTE: The radio only scans for a new site if the current signal is weak or when the radio is unable to detect any signal from the current site. If the RSSI value is strong, the radio remains on the current site.
Stopping an Automatic Site Search When the radio is actively searching for a new site: Procedure: Press the programmed Site Lock On/Off button. 1 A tone sounds and the display shows Site Locked. 2 The LED turns off and the display shows the channel alias. OR Procedure: Use the menu. 1 c to access the menu. 2 ^ or v to Utilities and press c to select. 3 ^ or v to Radio Settings and press c to select. 4 ^ or v to Site Roaming and press c to select. 5 ^ or v to Lock Site State. c 6 Press c to lock site.
Starting a Manual Site Search Procedure: Press the programmed Manual Site Roam button and proceed to Step 6. OR Follow the procedure below. 1 c to access the menu. 2 ^ or v to Utilities and press c to select. 3 ^ or v to Radio Settings and press c to select. 4 ^ or v to Site Roaming and press c to select. Security You can enable or disable any radio in the system. For example, you might want to disable a stolen radio, to prevent the thief from using it, and enable that radio, when it is recovered.
Radio Enable Procedure: Use the menu. 1 c to access the menu. Procedure: Use the programmed Radio Enable button. 2 ^ or v to Contacts and press c to select. The entries 1 Press the programmed Radio Enable button. are alphabetically sorted. 3 ^ or v to the required alias or ID and press c to select. OR ^ or v to Manual Dial and press c to select. Key in the subscriber alias or ID and press c. 4 ^ or v to Radio Disable and press c to select.
^ or v to Manual Dial and press c to select. Key in the subscriber alias or ID and press c. 4 ^ or v to Radio Enable and press c to select. 5 The display shows Radio Enable and the subscriber alias or ID. The LED lights up solid green. 6 Wait for acknowledgment. 7 If successful, the radio sounds a positive indicator tone and the display shows positive mini notice. OR If unsuccessful, the radio sounds a negative indicator tone and the display shows negative mini notice.
Password Lock Features If enabled, this feature allows you to access your radio via password upon powering up. Accessing the Radio from Password Procedure: Power up the radio. 1 You hear a continuous tone. 2 Enter your current four-digit password with the radio’s keypad. The display shows ●●●●. Press cto proceed. OR Enter your current four-digit password. Press ^ or v to edit each digit’s numeric value. Press > or c to move to the next digit. Each digit changes to ●. Press c to confirm your selection.
Your radio restarts the 15 minutes timer for locked state when you power up. Turning the Password Lock On or Off Procedure: 1 c to access the menu. 2 ^ or v to Utilities and press c to select. 3 ^ or v to Radio Settings and press c to select. 4 ^ or v to Passwd Lock and press c to select. 5 Enter your current four-digit password. See Step 2 in Accessing the Radio from Password on page 90. 6 If the password is correct: Press c to enable Password Lock. The display shows 9 beside Enabled.
Changing the Password Procedure: 1 c to access the menu. 2 ^ or v to Utilities and press c to select. 3 ^ or v to Radio Settings and press c to select. 4 ^ or v to Passwd Lock and press c to select. 5 Enter your current four-digit password. See Step 2 in Accessing the Radio from Password on page 90. 6 If the password is correct: ^ or v to Change Pwd and press c to select. OR If the password is incorrect: The display shows Wrong Password and automatically returns to the previous menu.
Bluetooth Operation This feature allows you to use your radio with a Bluetoothenabled device (accessory) via a Bluetooth connection. Your radio supports both Motorola and COTS (Commercially available Off-The-Shelf) Bluetooth-enabled devices. Bluetooth operates within a range of 10 meters line of sight. This is an unobstructed path between your radio and your Bluetooth-enabled device.
4 ^ or v to the required device and press c to select. OR ^ or v to Find Devices to locate available devices. ^ or v to the required device and press c to select. 5 ^ or v to Connect and press c to select. Display shows Connecting to . Your Bluetooth-enabled device may require additional steps to complete the pairing. Refer to respective Bluetoothenabled device’s user manual. 6 If successful, the radio display shows Connected. A tone sounds and 9 appears beside the connected device.
Switching Audio Route Editing Device Name You can toggle audio routing between internal radio speaker and external Bluetooth-enabled accessory. You can edit the name of available Bluetooth-enabled devices. Procedure: 1 c to access the menu. 1 Press the programmed Bluetooth Audio Switch button . 2 A tone sounds and display shows Route Audio to Radio. OR A tone sounds and display shows Route Audio to Bluetooth. Viewing Device Details Procedure: 1 c to access the menu.
Notification List Your radio has a Notification List that collects all your “unread” events on the channel, such as unread text messages, telegrams, telemetry messages, missed calls, and call alerts. The Notification icon appears on the status bar when the Notification List has one or more events. The list supports a maximum of forty (40) unread events. When it is full, the next event automatically replaces the oldest event. After the events are read, they are removed from the Notification List.
NOTE: At Step 5, you can also use < or > to change the selected option. Turning Keypad Tones On or Off You can enable and disable keypad tones if needed. Procedure: 1 c to access the menu. 2 ^ or v to Utilities and press c to select. 3 ^ or v to Radio Settings and press c to select. 4 ^ or v to Tones/Alerts and press c to select. 5 ^ or v to Keypad Tones and press c to select. 6 Press c to enable keypad tones. The display shows 9 beside Enabled. OR Press c to disable keypad tones.
Turning the Talk Permit Tone On or Off Setting the Power Level You can enable and disable the Talk Permit Tone if needed. You can customize your radio’s power setting to high or low for each channel. Procedure: 1 c to access the menu. 2 ^ or v to Utilities and press c to select. 3 ^ or v to Radio Settings and press c to select. Settings: High enables communication with radios located at a considerable distance from you. Low enables communication with radios in closer proximity.
NOTE: At Step 4, you can also use < or > to change the selected option. Changing the Display Mode You can change radio’s display mode between Day or Night, as needed. This affects the color palette of the display. Procedure: Press the programmed Display Mode button to toggle the display mode settings. OR Follow the procedure below. 1 c to access the menu. 2 ^ or v to Utilities and press c to select. 3 ^ or v to Radio Settings and press c to select. 4 ^ or v to Day/Night and press c to select.
Controlling the Display Backlight You can enable or disable the radio’s display backlight as needed. The setting also affects the Menu Navigation Buttons and keypad backlighting accordingly. Procedure: Press the programmed Backlight Auto button to toggle the backlight settings. OR Follow the procedure below. 1 c to access the menu. NOTE: At Step 4, you can also use < or > to change the selected option.
6 Screen returns to the previous menu. Locking and Unlocking the Keypad NOTE: At Step 4, you can also use < or > to change the selected option. You can lock your radio’s keypad to avoid inadvertent key entry. Turning the Introduction Screen On or Off Procedure: 1 c to access the menu. You can enable and disable the Introduction Screen if needed. 2 ^ or v to Utilities and press c to select. Procedure: 3 ^ or v to Radio Settings and press c to select. 1 c to access the menu.
Language Turning the LED Indicator On or Off You can set your radio display to be in your required language. You can enable and disable the LED Indicator if needed. Procedure: Procedure: 1 c to access the menu. 1 c to access the menu. 2 ^ or v to Utilities and press c to select. 2 ^ or v to Utilities and press c to select. 3 ^ or v to Language and press c to select. 3 ^ or v to Radio Settings and press c to select. 4 ^ or v to the required language and press c to enable.
Turning the Voice Operating Transmission (VOX) Feature On or Off This feature allows you to initiate a hands-free voice activated call on a programmed channel. The radio automatically transmits, for a programmed period, whenever the microphone on the VOX-capable accessory detects voice. Pressing the PTT button during radio operation will disable VOX.
Turning the Option Board Feature(s) On or Off Voice Announcement Option board capabilities within each channel and can be assigned to programmable buttons. Refer to your dealer or system administrator for more information. This feature enables the radio to audibly indicate the current Zone or Channel the user has just assigned, or programmable button press. This audio indicator can be customized per customer requirements.
Call Forwarding Menu Timer You can enable your radio to automatically forward voice calls to another radio. Set the period of time your radio stays in the menu before it automatically switches to the Home screen. Procedure: Procedure: 1 c to access the menu. 1 c to access the menu. 2 ^ or v to Utilities and press c to select. 2 ^ or v to Utilities and press c to select. 3 ^ or v to Call Forward. 4 Press c to enable Call Forwarding. The display shows 9 beside Enabled.
Analog Mic AGC Digital Mic AGC This feature controls the your radio's microphone gain automatically while transmitting on an analog system. It supresses loud audio or boosts soft audio to a preset value in order to provide a consistent level of audio. This feature controls the your radio's microphone gain automatically while transmitting on an digital system. It supresses loud audio or boosts soft audio to a preset value in order to provide a consistent level of audio.
Intelligent Audio GPS Your radio automatically adjusts its audio volume to overcome current background noise in the environment. Global Positioning System (GPS) is a satellite navigation system that determines the radio’s precise location. Use the following features to toggle Intelligent Audio on or off. It is recommended you only disable GPS to save battery life when the GPS signal is unavailable. Procedure: Press the programmed Intelligent Audio button to toggle the feature on or off.
Accessing General Radio Information Your radio contains information on the following: • Battery • Radio Alias and ID • Firmware and Codeplug Versions • GPS Information NOTE: Press d at any time to return to the previous screen or long press d to return to the Home screen. The radio exits the current screen once the inactivity timer expires. Accessing the Battery Information Displays information on your radio battery. Procedure: 5 The display shows the battery information.
Checking the Firmware Version and Codeplug Checking the GPS Information Version Displays the GPS information on your radio, such as values of: Displays the firmware and codeplug versions on your radio. Procedure: 1 c to access the menu. 2 ^ or v to Utilities and press c to select. • Latitude • Longitude • Altitude • Direction 3 ^ or v to Radio Info and press c to select. • Velocity 4 ^ or v to Versions and press c to select.
Front Panel Programming (FPP) Your radio is able to customize certain feature parameters to enhance the use of your radio. Entering FPP Mode Procedure: 1 c to access the menu. 2 ^ or v to Utilities and press c to select. 3 ^ or v to Program Radio and press c to select. NOTE: Long press d at any time to return to the Home screen. 11 0 English Editing FPP Mode Parameters Use the following buttons as required while navigating through the feature parameters.
Accessories • UHF, 403 – 527 MHz, Whip Antenna (PMAE4068_) Accessories Your radio is compatible with the accessories listed in this chapter. Contact your dealer for details. Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 111 Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 111 Carry Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 112 Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Carry Devices • Nylon Carry Case with 3-Inch Fixed Belt Loop for Full-Keypad and Limited-Keypad Radio (PMLN5844_) • Belt Clip for 2-Inch Belt Width (PMLN4651_) • Belt Clip for 2.5-Inch Belt Width (PMLN7008_) Headsets and Headset Accessories • Heavy Duty Noise-Canceling Headset (PMLN5275_) • Non-Secure Wireless Headset & Pod with Push-to-Talk Audio, 12-Inch Cable (NNTN8125_) • Non-Secure Wireless Headset & Pod with Push-to-Talk Audio, 9.
• IMPRES 2-Wire Surveillance Kit, Black (RLN5880_) • IMPRES 2-Wire Surveillance Kit, Beige (RLN5881_) Acoustic Tube, Black (RLN5882_) • IMPRES 2-Wire Surveillance Kit with Clear, Comfortable Acoustic Tube, Beige (RLN5883_) • IMPRES 3-Wire Surveillance, Black (PMLN5097_) • IMPRES 3-Wire Surveillance, Beige (PMLN5106_) Accessories • IMPRES 2-Wire Surveillance Kit with Clear, Comfortable • IMPRES 3-Wire Surveillance Kit with Clear, Comfortable Acoustic Tube, Black (PMLN5111_) • IMPRES 3-Wire Surveillance
The Capacity Warranty Batteries and Chargers Warranty The capacity warranty guarantees 80% of the rated capacity for the warranty duration. The Workmanship Warranty The workmanship warranty guarantees against defects in Batteries and Chargers Warranty workmanship under normal use and service.
obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Limited Warranty I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG: MOTOROLA SOLUTIONS, INC.
INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. III. STATE LAW RIGHTS: SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. Limited Warranty IV.
VI. PATENT AND SOFTWARE PROVISIONS: Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof.
Notes Notes 11 8 English
m XPR Series Digital Portable Radios Quick Reference Card NOTE: Refer to User Guide for more details on your radio's operations/features. Radio Controls 1 2 3 17 16 15 5 6 7 8 13 12 11 10 9 Record your radio’s programmable button functions in the blanks provided. SP represents Short Press, LP represents Long Press.
Selected channel is being monitored. or Radio is currently set at Low Power (L) or High Power (H). Tones are turned off. Radio bypasses the repeater and communicates directly with another radio.* The number of bars (0 – 4) shown indicates the charge remaining in the battery. Blinks when the battery is low. * Not applicable in Capacity Plus The Option Board is enabled. Call Icons The following icons appear during a call, and in The Option Board is disabled. The GPS feature is enabled.
Adjusting the Volume Turn the On/Off/Volume Control Knob clockwise or counterclockwise. After the third incorrect password, the display shows Wrong Password and then, shows Radio Locked. A tone sounds and the LED double blinks yellow. NOTE: Your radio can be programmed to have a minimum volume offset where the volume level cannot be turned down fully. Check with your dealer or system administrator for more information.
Follow the procedure below. 1 Turn the Channel Selector Knob to select the channel with the active group alias or ID. OR S to access the menu. Por Q to Contacts. Press N to select. Por Q to the alias or ID you want to call and press N to select. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to make the call. The LED lights up solid green. The display shows the group alias or ID, and the Group Call icon.
Your radio must have the Privacy feature enabled on the channel to send a privacyenabled transmission. Only target radios with the same Privacy Key OR the same Key Value and Key ID as your radio will be able to unscramble the transmission. Making an All Call NOTE: Your radio must be programmed to allow you to use this feature. Users on the channel cannot respond to an All Call. Long press the programmed number key and proceed to Step 2. OR Follow the procedure below.
6 The display shows Text Message: . 7 If the message is sent successfully, a tone sounds. Display shows Message Sent. OR If the message cannot be sent, the display shows Message Send Failed. Replying to a Text Message with Quick Text from the Inbox Press the programmed Text Message button and proceed to Step 3. OR Follow the procedure below. 1 S to access the menu. If the message fails to send, the radio returns you to the Resend option screen. 2 Por Q to Messages.
Privacy Press the programmed Privacy button to toggle privacy on or off. OR Follow the procedure below. 1 S to access the menu. 2 Por Q to Utilities. Press N to select. 3 Por Q to Radio Settings. Press N to select. 4 Por Q to Privacy. Press N to select. 5 The display shows Privacy and Turn On. Press N to enable privacy. The display shows Privacy On. OR The display shows Privacy and Turn Off. Press N to disable privacy. The display shows Privacy Off.
Notes English
