User's Manual

DISASSEMBLING AND REASSEMBLING THE RSM

Disassembling the RSM before the one (1) year

limited warranty has expired will void the warranty.

Disassembling

1. Remove the battery cover by inserting a coin or

other thin object into the screw slot (See

Figure 2). Turn the screw counter-clockwise.

2. Remove the batteries.

3. Remove the two screws in the battery compart-

ment using a T8 Torx® driver.

4. Gently pull the front and back housings apart.

5. Gently pry the main board up from the hous-

ing using a small flat bladed screwdriver.

Refer to Figure 3 for placement of screw-

driver.

6. Lift the main board by gently grasping the

antenna and pivoting the board out of the

housing.

Reassembling

OTE: When inserting the board into the hous-

ing, make sure that the switches do not

push the rubber actuators out of place

and that both are properly aligned to one

another, as shown in Figure 3