User Manual

6875840M01-A February 2008
Advanced Radio Operations: Accessing the Advanced Menu 3-3
Remote Disabling
NOTE: Manager Mode must be enabled in order for a user to use this feature. Refer to “ Manager
Mode” on page 4-8.
Remote Disabling allows a user to remotely enable or disable another DTR Series radio on their
channel. The selected radio must be turned on and within range in order to be enabled or disabled.
1. From the Advance menu, scroll to highlight Remote Disable and press under Select.
The Remote Disable screen appears.
2. Scroll to highlight a radio name from the list. Press under either Enable or Disable.
The screen changes to confirm the selection.
NOTE: To cancel out of Remote Disable, press and press under Select.
3. To enable or disable the selected radio, press under either Yes or No.
Once the radio is disabled, the display shows “Radio Disabled” and the radio cannot transmit,
receive, or access it’s contacts.
Call Forward
Remote Disable
Remote Monitor
Select
Back
Scan:On
Joe Smith
Jones
Kevin
Disable
Remote Disable
Enable
Joe Smith
Radio Disabled