User Manual

February 2008 6875840M01-A
6-4 Cloning Mode: Cloning by Sending a Contact
8. Scroll to the contact to receive the new contact.
9. Press under Select to select the contact.
10. Press under Prgm. The screen is displayed showing the Add: and To: selections. If
these are correct press under Go to transmit the selection over the air. If the selections
are not correct press under Back to return to the selection menu.
If cloning was successful, both the source and targets radios indicated “Programming Successful”. If
over-the-cloning fails, the radio displays the failed member so the user can attempt cloning again.
For more information on DTR products, visit the following website at: <http://www.motorola.com/DTR/>.
Add:Security
Change
Send Contact
To:Joe Smith
Prgm
Press Go To
Go
Back
Add:Security
To:Joe Smith
Over The Air