User Manual

English

PROGRAMMING FEATURES

ACTIVE CHANNELS

While in Auto-Scan mode, short pressing the PTT

button shifts the radio to ‘Active Channels’ feature.

Modify the amount of channels available using the

SB1 and SB2 buttons.

WEATHER CHANNEL PROGRAMMING

(NOT FOR RDU4103)

After setting the amount of Active Channels, short

pressing the PTT button moves you to Weather

Channel feature.

Use the SB1 and SB2 buttons to Enable/ Disable the

feature.

SAVING SETTINGS

Once you are satisfied with the settings, you can

either:

• short press the PTT button to continue

programming,

• long press the PTT button to save and return to

‘Idle’ Programming Mode, or

• long press the PTT button twice to exit ‘Idle’.

PROGRAMMING MODE FAQ

I got distracted while programming and forgot which

feature I was programming. What should I do?

• Return to ‘Idle’ Programming Mode and start

over. You will not be able to return to

Programming Mode (the radio does not provide

further way to let you know the specific stage you

are at in the Programming Mode).

• Therefore you can:

• Long press the PTT button. The radio will

return to ‘Idle’ Programming Mode or,

• Turn OFF the radio and enter Programming

Mode again. (Refer to “Entering Advanced

Configuration Mode” on page 36 for more

information)

I am trying to program a frequency (or a code) value

but the radio would not do it. It rolled over and took me

back to value ‘0’.

• The radio disallows you to program any value

that is not available in the frequencies and codes

pool. For example, if you try to program code

220, the radio would not accept it as the

maximum value allowed is 219. Same goes for

the frequencies. Refer to the “Frequency and

MN002895A01_final.book Page 38 Thursday, January 5, 2017 10:51 AM