User`s guide

19
Getting Started
Charging the Battery
New batteries are shipped partially charged. Before
you can use your phone, you need to install and charge
the battery, as indicated by the following instructions.
2 If necessary, slide
down the battery
door release latch
and lift the door off
of the phone.
3 Insert the battery,
printed arrows
first, into the top of
the battery
compartment and
push down.
4 Replace the battery door.
Do This
Release
latch
20
Getting Started
Some batteries perform best after several full charge/
discharge cycles.
Notes:
• When you charge the battery, the battery level
indicator in the upper right corner of the display
shows how much of the charging process is
complete.
• If the battery charge drops too low, your phone
may power off during a call, even when the charger is
connected. To avoid this possibility, do not make calls
while charging the battery.
Do This
1 Plug the
travel
charger into
your phone
with the
release tab
facing up.
2 Plug the other end of the travel charger into the
appropriate electrical outlet.
3 When your phone indicates that the battery is
fully charged (
&KDUJH&RPSOHWH ), press the
release tab and remove the travel charger.
Release
tab