Instructions

10
English
Note:
1. The transmission will be on the “Home Channel” if you press the PTT
button while the radio is scrolling through inactive channels. You may
press the Scan/Monitor button to stop scanning at any time.
2. You may immediately resume the scan by briefly pressing or if
the radio stops on an undesired transmission.
3. You may temporarily remove that channel from the scan list by
pressing and holding or for 3 seconds if the radio stops
repeatedly on an undesired transmission. You may remove more
than one channel this way.
4. Turn the radio OFF and then turn back ON, or EXIT and re-enter the
scanning mode by pressing Scan/Monitor to restore and remove
channel(s) to the scan list.
5. You cannot remove the “Home Channel” from the scan list.
6. In the Advanced Scan, the detected code will only be used for one
transmission. You must take note of that code, exit scan, and set the
detected code on that channel to permanently use.
Warranty Information
The authorized Motorola Solutions dealer or retailer where
you purchased your Motorola Solutions two-way radio and/or
original accessories will honour a warranty claim and/or
provide warranty service.
Please return your radio to your dealer or retailer to claim
your warranty service. Do not return your radio to Motorola
Solutions.
In order to be eligible to receive warranty service, you must
present your receipt of purchase or a comparable substitute
proof of purchase bearing the date of purchase. The two-
way radio should also clearly display the serial number. The
warranty will not apply if the type or serial numbers on the
product have been altered, deleted, removed, or made
illegible.