Radio User Manual

18
English
GETTING STARTED
TURNING THE RADIO ON OR OFF RADIO ON MESSAGE
At power up the radio may display a message
customised by your dealer, e.g.:
After this text has been displayed, the radio
performs a self test routine. During the routine the
Green LED lights. On completion of a successful
self test the radio produces the Self-Test pass Tone,
the Green LED indicator goes out and the display
shows the channel that was in use at power down,
typically:
This may be a number or an alias and will be the
current channel.
ADJUSTING THE VOLUME
Turn the On/Off/Volume Control knob clockwise to
increase the volume, or counterclockwise to
decrease the volume.
– or – use the pre-programmed Volume Set button
Turn the On/Off/Volume
Control knob clockwise. If
power-up is successful,
you will hear the Self-Test
Pass Tone ( )
and see the display icons
light momentarily and the
LED flash green.
If the radio fails to power
up, you will hear the Self
Test Fail Ton e
().
The radio will need to be
returned for re-
programming.
Turn the On/Off/
Volume Control knob
counter-clockwise
until you hear a click
and both the display
and LED indicators
turn off.
ON OFF
1 Hold down the Volume Set button; you will
hear a continuous tone.
2 Turn the On/Off/Volume Control knob to the
desired volume level.
3 Release the Volume Set button.
RADIO ON
CHAN 32