User guide

4 - 28 Omnii (Windows Embedded Hand-Held 6.5) User Guide
• If you need to specify server information, double-tap on the appropriate adaptor, and then tap on the IP
Address and/or Name Servers tab.
• If necessary, use a network cable to connect the network card to your network. Refer to the documentation
shipped with your network card for details.
• To activate the connection, launch
the desired program (e.g., Internet Explorer). The Omnii will connect
automatically.
Changing Network Card Settings
• If you use your network card in two locations like work and home, you’ll need to change the network to
which the network card connects.
•Tap on S
tart>Settings>Connections>Network Cards.
NOTE Because most networks use DHCP, you should not need to change these settings
unless instructed to do so by your network administrator.