User guide

Accessories 5 - 17
Connecting to the Ethernet Network
Network Access
Omnii automatically detects insertion in
to the docking station and loads the appropriate drivers to communicate
with the network. To connect more docking stations downstream (up to 4 on the same network), use the
Ethernet cable supplied with your quad docking station as the daisy chain cable (see Figure 5-15 Daisy chain
configuration on page 5-17).
Figure 5-14 Ethernet network connection
Figure 5-15 Daisy chain configuration
Cleaning the ST4004
Use only mild detergent or soapy water on a slightly damp cloth to clean the ST4004. Avoid abrasive cleaners,
solvents or strong chemicals for cleaning. The plastic case is susceptible to harsh chemicals. The plastic is
partially soluble in oils, mineral spirits and gasoline. The plastic slowly decomposes in strong alkaline solutions.
Left-side RJ45 port
10 or 100 Base-T
(Ethernet connector to network)
Link LED
(solid amber)
Activity LED
(flashing green)
Right-side RJ45 port
(Ethernet connector to
other docks)
Ethernet connector
Maximum of four ST4004 Quad Docking Stations on one network cable
Ethernet network cable
Daisy chain cable
Daisy chain cable
IMPORTANT Do not immerse the unit in water. Dampen a soft cloth with mild
detergent to wipe the unit clean.