User guide

2 - 15 Omnii (Windows Embedded Hand-Held 6.5) User Guide
Battery Charge Status LED
The far left LED is reserved for battery charge status. This indicator is active even when the hand-held
is inserted in a docking station (and in suspend mode) so that the charge status of the battery can be
de
tected easily.
Operating System Status LED
The second LED indicates system notifications and operating system status. It is also available for user-loaded
custom Windows Embedded Hand-Held 6.5 applications.
Radio Status LED
The third LED from the left – the blue LED – indicates that the GPS radio is enabled or that the WWAN radio is
enabled.
Scanner Status LED
The fourth (far right) LED indicates scanner status.
Charge LED Behaviour Function
OFF External power not detected.
Solid Green Battery charging complete.
Flashing Green Charge in progress.
Yellow Cell temperature out of range for charge.
Solid Red Unable to charge battery.
Operating LED Behaviour Function
OFF when unit is in Suspend or
Shutdown.
Normal operating status.
Solid Yellow The unit is powering on.
Fast Flashing Yellow The unit is entering Suspend mode.
Flashing Yellow This is application dependent.
Radio Traffic LED Behaviour Function
OFF The radio is disabled.
Slow Flashing Blue The radio is enabled and active.
Scan LED Behaviour Function
OFF The scanner is not in use.
Solid Red during scan Scan in progress.
Solid Green after decode
OFF when scan ended
Successful scan.
Flashing Red Unsuccessful scan.