User's Guide

Chapter 23
Contacts Settings
The Contacts menu provides an address book function on your radio. Each entry corresponds to an ID
for making calls. The entries are alphabetically sorted.
Each entry supports different call types depending on your settings. The contact entries display Call
Type, Call Alias, and Call ID information.
You can assign entries to programmable number keys as quick dial. You see a check mark before
each number key that is assigned to an entry. If the check mark is before the Empty interface, a
number key is not assigned to the entry.
Personal Computer (PC) Calls and Dispatch Calls are data-related. These calls are only available with
an application.
23.1
Adding New Contacts
Procedure:
1 From the menu, select Contacts→New Contact→<required contact type>.
The contact type options are Radio Contact or Phone Contact.
2 Enter the contact number.
3 Enter the contact name.
4 Select the required ringer type.
23.2
Setting Default Contacts
NOTE: This is applicable to 5-Tone Contacts only.
Procedure:
From the menu, select Contacts→<required ID or alias>→Set as Default.
If the setting is successful, your radio shows the following indications:
• A positive indicator tone sounds.
• The display shows a positive mini notice.
• The display shows a beside the selected contact.
23.3
Assigning Entries to Programmable Number Keys
Procedure:
1 From the menu, select Contacts→<required ID or alias>→Program Key.
MN007848A01-AB
Contacts Settings
103