User's Guide
Table Of Contents
- English
- Contents
- List of Figures
- List of Tables
- Legal and Support
- Intellectual Property and Regulatory Notices
- Legal and Compliance Statements
- Warranty and Service Support
- Read Me First
- Radio Care
- Introduction
- Radio Overview
- System Overview
- Getting Started
- 6.1 Charging the Battery
- 6.2 Attaching or Detaching the Battery
- 6.3 Attaching or Detaching the Antenna
- 6.4 Attaching the Universal Connector Cover
- 6.5 Removing the Universal Connector Cover
- 6.6 Cleaning the Universal Connector Cover
- 6.7 Turning the Radio On or Off
- 6.8 Holding Your Radio While Transmitting Audio
- 6.9 Adjusting the Volume
- 6.10 Using the Carry Case
- Home Screen Overview
- Icon-Based Menu Overview
- Basic Radio Operation
- General Radio Settings
- 10.1 Talkaround
- 10.2 Setting Date and Time
- 10.3 Setting Radio Tones and Alerts
- 10.4 Setting Power Levels
- 10.5 Adjusting Display Settings
- 10.6 Setting Squelch Levels
- 10.7 Keypad Lock Options
- 10.8 Setting Languages
- 10.9 Setting the Global Navigation Satellite System
- 10.10 Setting LED Indicators
- 10.11 Password Lock
- 10.12 Setting the Voice Announcement
- 10.13 Text-to-Speech
- 10.14 Setting the Microphone Automatic Gain Control
- 10.15 Setting the Microphone Distortion
- 10.16 Setting the Noise Suppress
- 10.17 Setting the Audio Ambience
- 10.18 Setting Audio Profiles
- 10.19 Setting the Text Entry
- 10.20 Voice Operating Transmission
- Types of Radio Calls
- Phone Calls
- Audio Recording
- Switching Audio Route between Internal Radio Speaker and Wired Accessory
- Connectivity
- 15.1 Wi-Fi Operation
- 15.2 Bluetooth®
- 15.2.1 Turning the Bluetooth On or Off
- 15.2.2 Connecting to Bluetooth Devices
- 15.2.3 Disconnecting from Bluetooth Devices
- 15.2.4 Switching Audio Route between Internal Radio Speaker and Bluetooth Device
- 15.2.5 Viewing Device Details
- 15.2.6 Editing Device Names
- 15.2.7 Deleting Device
- 15.2.8 Bluetooth Profiles
- Emergency Operation
- Man Down (Fall Alert)
- Lone Worker
- Call Alert Operation
- Call Log Features
- Call Queue
- Priority Call
- Contacts Settings
- Call Indicator Settings
- Privacy
- Scan
- Security
- Indoor Location
- Job Tickets
- Text Messaging
- Status Message
- Analog Message Encode
- Analog Status Update
- Auto-Range Transponder System
- Dynamic Caller Alias
- Dynamic Group Number Assignment
- Entering the Front Panel Programming
- Home Channel Reminder
- Monitor Feature
- Remote Monitor
- Radio Check
- Mute Mode
- Received Signal Strength Indicator
- Response Inhibit
- Transmit Inhibit
- Call Preemption
- Voice Interrupt
- Over-the-Air Programming
- Authorized Accessories List
- Français (Canada)
- Déclarations juridiques et de conformité
• If you want to deactivate call ringers for Private Call, select Enabled.
• If you want to deactivate call ringers for other options, select Off.
If you deactivate call ringers, your radio shows the following indications:
• For the Private Call option, a disappears beside Enabled.
• For the other options, the display shows a beside Off.
24.2
Assigning Ring Styles
You can program your radio to play one of the 11 predefined ring tones when receiving Private Calls,
Call Alerts, or Text Messages.
Procedure:
From the menu, select
Contacts→<required ID or alias>→View/
Edit→Ringer→<required tone>.
24.3
Ring Alert Type
For radios with batteries that do not support the vibrate feature and are not attached to a vibrating belt
clip, Ring Alert Type is automatically set to Ring. The available Ring Alert Type options are Silent and
Ring.
NOTE: If All Tones status is enabled, your radio displays the ring alert type. If All Tones status
is disabled, your radio displays the All Tone Mute icon.
24.3.1
Selecting Ring Alert Types
Procedure:
1 From the menu, select Utilities→Radio Settings→Tones/Alerts→Ring Alert Type.
2 Select one of the following options:
• Silent
• Ring
24.4
Escalating Alarm Tone Volume
You can program your radio to continually alert you when the radio calls remain unanswered. This alert
automatically increases the alarm tone volume over time. This feature is called Escalert.
Procedure:
From the menu, select Utilities→Radio Settings→Tones/Alerts→Escalert.
If Escalert is enabled, the display shows a beside Enabled.
If Escalert is disabled, the disappears beside Enabled.
MN007848A01-AB
Chapter 24 : Call Indicator Settings
106