User's Guide

Chapter 27
Security
For Capacity Max this features allows you to stun, revive, and kill the radio. For Other Systems, the
feature allows you to enable and disable radio.
For example, you may disable or stun stolen radio to prevent unauthorized users from using and revive
or enable the radio when it is recovered.
When a radio is stunned or disabled, the radio cannot request nor receive any user initiated services
on the system that performed the stun procedure. However, the radio can switch to another system.
The radio continues to send GNSS location reports and can be monitored remotely when it was
stunned or disabled.
NOTE: Contact your dealer to enable this feature.
27.1
Stunning Radios
Procedure:
1 Perform one of the following actions:
Option Actions
Stunning or disabling radios with Contact
List
From the menu, select Con-
tacts→<required ID or alias>→Ra-
dio Disable.
Stunning or disabling radios with Manual Di-
al
a From the menu, select Con-
tacts→Manual Dial→Radio Number.
b Enter the ID.
c Select Radio Disable.
2 For Other Systems, enter the passphrase if required.
The green LED blinks and the display shows Radio Disable: <ID>.
If the radio is successfully stunned, your radio shows the following indications:
• A positive indicator tone sounds.
• The display shows a positive mini notice.
If the radio is unsuccessfully stunned, your radio shows the following indications:
• A negative indicator tone sounds.
• The display shows a negative mini notice.
MN007848A01-AB
Security
117