User's Guide
Table Of Contents
- English
- Contents
- List of Figures
- List of Tables
- Legal and Support
- Intellectual Property and Regulatory Notices
- Legal and Compliance Statements
- Warranty and Service Support
- Read Me First
- Radio Care
- Introduction
- Radio Overview
- System Overview
- Getting Started
- 6.1 Charging the Battery
- 6.2 Attaching or Detaching the Battery
- 6.3 Attaching or Detaching the Antenna
- 6.4 Attaching the Universal Connector Cover
- 6.5 Removing the Universal Connector Cover
- 6.6 Cleaning the Universal Connector Cover
- 6.7 Turning the Radio On or Off
- 6.8 Holding Your Radio While Transmitting Audio
- 6.9 Adjusting the Volume
- 6.10 Using the Carry Case
- Home Screen Overview
- Icon-Based Menu Overview
- Basic Radio Operation
- General Radio Settings
- 10.1 Talkaround
- 10.2 Setting Date and Time
- 10.3 Setting Radio Tones and Alerts
- 10.4 Setting Power Levels
- 10.5 Adjusting Display Settings
- 10.6 Setting Squelch Levels
- 10.7 Keypad Lock Options
- 10.8 Setting Languages
- 10.9 Setting the Global Navigation Satellite System
- 10.10 Setting LED Indicators
- 10.11 Password Lock
- 10.12 Setting the Voice Announcement
- 10.13 Text-to-Speech
- 10.14 Setting the Microphone Automatic Gain Control
- 10.15 Setting the Microphone Distortion
- 10.16 Setting the Noise Suppress
- 10.17 Setting the Audio Ambience
- 10.18 Setting Audio Profiles
- 10.19 Setting the Text Entry
- 10.20 Voice Operating Transmission
- Types of Radio Calls
- Phone Calls
- Audio Recording
- Switching Audio Route between Internal Radio Speaker and Wired Accessory
- Connectivity
- 15.1 Wi-Fi Operation
- 15.2 Bluetooth®
- 15.2.1 Turning the Bluetooth On or Off
- 15.2.2 Connecting to Bluetooth Devices
- 15.2.3 Disconnecting from Bluetooth Devices
- 15.2.4 Switching Audio Route between Internal Radio Speaker and Bluetooth Device
- 15.2.5 Viewing Device Details
- 15.2.6 Editing Device Names
- 15.2.7 Deleting Device
- 15.2.8 Bluetooth Profiles
- Emergency Operation
- Man Down (Fall Alert)
- Lone Worker
- Call Alert Operation
- Call Log Features
- Call Queue
- Priority Call
- Contacts Settings
- Call Indicator Settings
- Privacy
- Scan
- Security
- Indoor Location
- Job Tickets
- Text Messaging
- Status Message
- Analog Message Encode
- Analog Status Update
- Auto-Range Transponder System
- Dynamic Caller Alias
- Dynamic Group Number Assignment
- Entering the Front Panel Programming
- Home Channel Reminder
- Monitor Feature
- Remote Monitor
- Radio Check
- Mute Mode
- Received Signal Strength Indicator
- Response Inhibit
- Transmit Inhibit
- Call Preemption
- Voice Interrupt
- Over-the-Air Programming
- Authorized Accessories List
- Français (Canada)
- Déclarations juridiques et de conformité
Chapter 33
Analog Status Update
Your radio can send preprogrammed messages from the Status List indicating your current activity to a
radio contact (for 5-Tone systems) or the dispatcher (for Motorola Data Communication systems).
For Motorola Data Communication (MDC) systems, the last acknowledged message is kept at the top
of the Status list. The other messages are arranged in alphanumeric order.
33.1
Sending Status Updates to Predefined Contacts
Procedure:
Perform one of the following actions:
• For Motorola Data Communication (MDC) systems, from the menu, select
Status→<required status>→Set as Default→Menu/OK.
• For 5-Tone systems, from the menu, select Status→<required status>→Set as
Default.
For 5-Tone systems, if you press the PTT button while in the Status List, you radio sends the
selected status update and returns to the home screen to start a voice call.
For MDC systems, if the request is successful, your radio shows the following indications:
• A positive indicator tone sounds.
• The display shows a positive mini notice.
For MDC systems, if the request is unsuccessful, your radio shows the following indications:
• A negative indicator tone sounds.
• The display shows a negative mini notice.
For 5-Tone systems, if the request is successful, your radio display shows a beside the
acknowledged status.
For 5-Tone systems, if the request is unsuccessful, your radio display shows a beside the previous
status.
33.2
Viewing 5-Tone Status Details
Prerequisites: Purchase the Software License Key.
Procedure:
From the menu, select Status→<required status>→View Details.
The display shows details of the selected status.
MN007848A01-AB
Chapter 33 : Analog Status Update
132