User's Guide

10.6
Setting Squelch Levels
You can adjust the squelch level to filter out unwanted calls with low signal strength or channels with
noise higher than normal background.
Procedure:
1 From the menu, select Utilities→Radio Settings→Squelch.
2 Perform one of the following actions:
• For a normal squelch level, select Normal Squelch.
• To filter out unwanted calls or background noise, select Tight Squelch.
10.7
Keypad Lock Options
With this feature, you can avoid accidentally pressing buttons or changing channels when your radio is
not in use. You can choose to either lock your keypad, channel selector knob, or both; depending on
your requirements.
Your dealer can configure one of the following options with the radio programming softwares:
• Lock Keypad
• Lock Channel Selector Knob
• Lock Keypad and Channel Selector Knob
Contact your dealer to determine how your radio has been programmed.
10.7.1
Locking or Unlocking the Keypad
Procedure:
Perform one of the following actions:
• To lock the keypad, from the menu, select Utilities→Radio Settings→Keypad Lock.
• To unlock the keypad, press Menu/OK→ * or delete key.
If the keypad is locked, the display shows a beside Enabled.
If the keypad is unlocked, the disappears beside Enabled.
10.8
Setting Languages
Procedure:
From the menu, select
Utilities→Radio Settings→Languages→<required language>.
A appears beside the selected language.
MN007848A01-AB
Chapter 10 : General Radio Settings
65