User's Guide

2 Perform one of the following actions:
• For WPA-Personal Wi-Fi, enter the password.
• For WPA-Enterprise Wi-Fi, the WPA is configured using the radio programming softwares.
If the password is correct, your radio automatically connects to the selected network access
point.
If the password is incorrect, the display shows Authentication Failure, and automatically
returns to the previous menu.
If the connection is successful, your radio displays a positive notice and the network access point is
automatically saved into your profile list.
If the connection is unsuccessful, your radio displays a negative notice screen and returns to the
previous menu.
15.1.4.2
Checking Wi-Fi Connection Status
Procedure:
Press the programmed Wi-Fi Status button.
If Wi-Fi connection is turned on and connected to a network, your radio shows the following indications:
• A voice prompt indicates that Wi-Fi is turned on.
• The display shows WiFi On, Connected.
If Wi-Fi connection is turned on but not connected to any network, your radio shows the following
indications:
• A voice prompt indicating that Wi-Fi is turned on.
• The display shows WiFi On, Disconnected.
If Wi-Fi connection is turned off, your radio shows the following indications:
• A voice prompt indicating that Wi-Fi is turned off.
• The display shows WiFi Off.
15.1.4.3
Refreshing Network Lists
Procedure:
From the menu, select
WiFi→Networks→Refresh.
Your radio displays the latest network list.
MN007848A01-AB
Chapter 15 : Connectivity
85