029B40Book Page -1 Tuesday, September 2, 1997 10:49 AM USER’S GUIDE A
1029B40Book Page 0 Tuesday, September 2, 1997 10:49 AM Contents Introduction Control Buttons....................................... 2 Getting Started Turning Your Pager On ........................... 3 Turning Your Pager Off ........................... 4 Using the Function Menu ....................... 5 Message-Status Screen ......................... 6 Backlight................................................. 7 Receiving/Reading Personal Messages .......................... 7 Display Zoom .................
Congratulations on purchasing an Advisor Elite pager. Your new pager provides exciting capabilities in messaging and can become a vital part of your business and personal life. The pager’s four-line display and expanded functionality incorporates many of the most advanced electronic, communications and wireless technologies available. The Advisor Elite pager uses FLEX® technology. FLEX technology extends battery life up to four times longer than ordinary pagers and improves the ability to receive messages.
1029B40Book Page 2 Tuesday, September 2, 1997 10:49 AM GETTING STARTED Effective Use of Your Pager Your pager can help you keep in contact with everyone important to you. By giving your pager number to your business associates, family, and friends, you can be contacted whenever needed. If you have a cellular phone, give your pager number instead of your cellular number. Then you can decide who to call back on your cellular phone without paying for incoming calls.
H I Left/Right Directional Buttons Used to navigate through the Function menu and through your messages. K Function/Select Button J Read/ Power On Used to display the Function menu, to select a pager function, and to activate your selection. Used to turn the pager on and to read messages. F Up/Down Directional Buttons Use to navigate through time, alarm, date setting functions and to navigate through messages.
GETTING STARTED 1029B40Book Page 4 Tuesday, September 2, 1997 10:49 AM Private Time Power On Audible _ Alarm Q N P Example of the Standby Screen When the pager is on and no activity is taking place, the Standby screen is displayed. The Standby screen displays the power-on indicator N and may display other pager status indicators. Turning Your Pager Off Press K to display the Function menu. Press H to move the cursor to q. Press K. TURN PAGER OFF? is displayed. Press K again to turn the pager off.
1029B40Book Page 5 Tuesday, September 2, 1997 10:49 AM The Function menu provides access to the many features of your pager through the use of symbols and prompts. ➊ Press K to display the Function menu. When the Function menu is initially displayed a flashes to indicate the location of the cursor. mmmmmmomm VVjV u u ESCAPE lvL1rqaACgduZ Example of Fully Displayed Function Menu ➋ Press H or I to move the cursor within the Function menu.
1029B40Book Page 6 Tuesday, September 2, 1997 10:49 AM GETTING STARTED Message-Status Screen The Message-status screen shows the current status of your messages. For example, unread messages are indicated by a flashing m symbol, locked messages are indicated by g. The Message-status screen also displays the time and date and any activated pager settings. The Message-status screen can be accessed by pressing H, I, G, or F from the Standby screen.
1029B40Book Page 7 Tuesday, September 2, 1997 10:49 AM In low-light conditions, the pager’s backlight automatically turns on whenever a button is pressed. You can manually turn the backlight on or off at any time by pressing and holding K for two seconds. The backlight automatically turns off when the pager returns to the Standby screen. Receiving/Reading Personal Messages Your pager can receive up to 19 personal messages.
29B40Book Page 8 Tuesday, September 2, 1997 10:49 AM Reading a Stored Message ➊ From the Message-status screen press H or I to move the cursor to GETTING STARTED the message you want to read. ➋ Press J to read the message. Message Reading Features Press G to read a message line by line. Press and hold J for automatic message scrolling, screen by screen. Press F to go back to the first screen of the message. Press H or I while reading a message to read the previous or next message.
1029B40Book Page 9 Tuesday, September 2, 1997 10:49 AM This feature allows you to scan the first line of your messages. ➊ Press J . ➋ Use the H and I buttons to move the cursor through your messages. Note: Previewing an unread message does not remove the unread message status from the message. Display Zoom When this feature is enabled, the standard 4-line display is converted to a 2-line display. The characters are enlarged vertically, increasing message readability.
1029B40Book Page 10 Tuesday, September 2, 1997 10:49 AM To Disable Display Zoom TIME AND DATE ➊ From the Function menu, press H to move the cursor to 4. ➋ Press K. Display zoom is now disabled. Setting the Time and Date ➊ ➋ ➌ ➍ ➎ 10 From the Function menu, press H to move the cursor to v. Press K to display the Set-time-and-alarm screen. Press I to move the cursor to the hour digit. Press F or G to adjust the hour. Repeat steps 3 and 4 to adjust the minutes, AM/PM/24 hr., month, day, and year.
1029B40Book Page 11 Tuesday, September 2, 1997 10:49 AM ➏ Press K to activate the time and date setting. zv 03:15PM 05/05/97z SET TIME Example of Set-Time Screen If you move the cursor past the last symbol in the row (far right), it automatically wraps around to the first symbol in the beginning of the same row (far left). Note: To exit from any screen without making changes, press J .
1029B40Book Page 12 Tuesday, September 2, 1997 10:49 AM Setting the Incoming Message Alert You can set your pager’s incoming message alert to an audible alert, a vibrating alert, a chirp (short beep) alert, a chirp alert with vibration, or no message alert (completely silent). Note: Priority messages always have an audible alert. ALERTS Setting an Audible Alert ➊ From the Function menu, press H to move the cursor to s. ➋ Press K.
1029B40Book Page 13 Tuesday, September 2, 1997 10:49 AM ➊ From the Function menu, press H to move the cursor to l. ➋ Press K to display the Choose alert menu. ➌ Press H or I to move the cursor to the desired alert. The pager gives a sample of each alert as you move through the selections. ➍ Press K to activate your selection. The pager gives a sample of the Note: If P is not displayed in the Standby screen, your pager is already in the silent alert mode.
1029B40Book Page 14 Tuesday, September 2, 1997 10:49 AM LOCKING MESSAGES Locking and Unlocking Messages Up to 10 messages can be locked to prevent them from being deleted or from being replaced when memory is full. When a message is locked, the m symbol is replaced by the g symbol indicating the message is locked. To Lock or Unlock a Message ➊ From the Message-status screen, press H or I to select the message you want to lock or unlock. ➋ Press K .
1029B40Book Page 15 Tuesday, September 2, 1997 10:49 AM Deleting Messages To Delete a Single Message ➊ From the Message-status screen, press H or I to select the message ➋ ➌ ➍ ➎ you want to delete. Press K . Press I to move the cursor to A. Press K. DELETE MESSAGE? is displayed. Press K again to delete the message. To Delete a Message while Reading It Follow steps 2 through 5 above while the message is displayed.
1029B40Book Page 16 Tuesday, September 2, 1997 10:49 AM PAGER ALARMS Pager Alarm Your pager has an alarm that can be set for a specific time and date, or a specific time on a daily basis. At the selected alarm time, your pager alerts. If the alarm times passes without being acknowledged, Q flashes until any button is pressed. To Set a One-Time Alarm ➊ From the Function menu, press H to move the cursor to v. ➋ Press K. The Set-time-and-alarm screen is displayed. ➌ Press G.
The alarm symbol shows the current alarm status. cis displayed if the alarm is enabled, e is displayed if the alarm is disabled. ➍ Press I to move the cursor to the alarm symbol. ➎ Press F or G until c is displayed. ➏ Press I to move the cursor to the hour digits. ➐ Press F or G to adjust the hour digits. ➑ Repeat steps 6 and 7 to adjust the minutes, AM/PM/24 hr., and date. ➒ Press K to activate your selection. The Q symbol is displayed on the Standby screen.
1029B40Book Page 18 Tuesday, September 2, 1997 10:49 AM To Set the Alarm to Alert Daily ➊ Follow steps 1 through 8 in “To Set a One-Time Alarm” to set the alarm time. PAGER ALARMS ➋ When setting the date in step 8, press G until you see double dashes for the month, day, and year (--/--/--). zv 03:15PM 05/05/97z zc15:30PM --/--/--z SET ALARM Example of Set-Alarm Screen for a Daily Alert ➌ Press K to activate your selection.
1029B40Book Page 19 Tuesday, September 2, 1997 10:49 AM This feature allows you to set a one-time or daily alarm for a selected personal message. You can set an alarm for up to five personal messages. When a message alarm is set, b replaces m in the Message-status screen. At the time the alarm sounds, m is again displayed unless the alarm is set to alert daily. Press J to display the message for which the alarm is set.
1029B40Book Page 20 Tuesday, September 2, 1997 10:49 AM MESSAGE ALARMS ➍ Press K. The Set-message-alarm screen is displayed. zv 03:15PM 05/05/7z zc15:30PM 05/05/97z SET ALARM Example of Set-Message-Alarm Screen The alarm symbol shows the current alarm status. c is displayed if the message alarm is enabled, e is displayed if the message alarm is disabled. ➎ Press F or G until c is displayed. ➏ Press I to move the cursor to the hour digits.
1029B40Book Page 21 Tuesday, September 2, 1997 10:49 AM You can also set a message alarm while reading the message by following steps 2 through 9 above. To Set a Daily Message Alarm ➊ Follow steps 1 through 8 to set the message alarm time. ➋ When setting the date in step 8, press G until you see double dashes for the month, day, and year (--/--/--). ➌ Press K to activate your selection. The alarm is now set to alert every day at this specified time.
1029B40Book Page 22 Tuesday, September 2, 1997 10:49 AM Private Time You can select a time period during which your pager is completely silent. Your pager still receives messages but is does not alert. The pager alerts only if an alarm expires or a priority message is received. PRIVATE TIME To Set Private Time ➊ From the Function menu, press H to move the cursor to 3. ➋ Press K.
1029B40Book Page 23 Tuesday, September 2, 1997 10:49 AM ➌ ➍ ➎ ➏ ➐ PRIVATE TIME Press and release G until 3 is displayed. Press I to move the cursor to the hour digit. Press F or G to adjust the hour digit. Repeat steps 4 and 5 to adjust the on and off time setting . Press K to activate your selection. The symbol _ is displayed in the Standby screen when private time is enabled. Note: If the on time is equal to the off time, private time is not enabled. To Disable Private Time Press K.
1029B40Book Page 24 Tuesday, September 2, 1997 10:49 AM INFORMATION SERVICES Maildrop/Information Service Option Your pager is capable of receiving maildrop messages, also known as information services. Maildrop messages are received and read the same way as personal messages and the icon indicators are located on the second row of the display.
• If the pager’s incoming message alert is set to silent (vibrate), all maildrops with the alert set to on (j), produce a 2-second vibration when a maildrop message is received. • If the pager’s incoming message alert is set to audible, the maildrop alert can be set to either the standard alert, one of the seven pleasing alerts, a chirp alert, a chirp and silent alert, or no message alert via the Choose-alert menu. The length of the maildrop alert is 2 seconds.
1029B40Book Page 26 Tuesday, September 2, 1997 10:49 AM INFORMATION SERVICES Selecting a Maildrop Alert ➊ From the Message-status screen, press H, I, or G to move the cursor ➋ ➌ ➍ ➎ ➏ 26 to the desired maildrop. Press K. Press I to move the cursor to j. Press K. The choose alerts menu is displayed. Press H or I to move the cursor to the desired alert. Press K to activate the alert. The pager gives a sample of the alert, unless no message alert is selected.
1029B40Book Page 27 Tuesday, September 2, 1997 10:49 AM Your pager has two notebook areas, a personal notebook for storing personal messages, and a maildrop notebook for storing information service messages. Notebook messages are indicated by u. Personal messages are indicated on the first row of the display. Maildrop messages are indicated on the second row of the display.
1029B40Book Page 28 Tuesday, September 2, 1997 10:49 AM Storing Personal and Maildrop Messages in Your Notebooks NOTEBOOKS ➊ From the Message-status screen, press F , G, H, or I to move the cursor to the personal or maildrop message you want to move into the notebook. ➋ Press K. ➌ Press I to move the cursor to u. ➍ Press K. The message is now in the notebook.
1029B40Book Page 29 Tuesday, September 2, 1997 10:49 AM ➌ Press F or G to scroll through the list until Ku is displayed at the beginning of the notebook message you want to delete. zuTake children to school Example of Notebook Screen in Delete Mode Press K to display the Function menu. Press I to move the cursor to A. Press K. DELETE MESSAGE? is displayed. Press K to delete the message. Repeat steps 3 through 7 for each message you want to delete. Note: Notebook messages are deleted one at a time.
1029B40Book Page 30 Tuesday, September 2, 1997 10:49 AM Message Storage Your pager can store up to 19 personal messages in memory. Note: Stored messages differ from locked messages. They can be deleted or overwritten when memory is full and a new message comes in. FEATURES Automatic Message Deletion If all 19 message slots are full and a new message is received, the oldest, unlocked, un-alarmed, and previously read message is automatically deleted when a new message is received.
1029B40Book Page 31 Tuesday, September 2, 1997 10:49 AM Key Click If this feature is enabled, and the pager is in the audible mode, a “click” is emitted when any of the pager’s buttons are pressed. The click is not emitted when the pager is in the silent mode. If the same message is received more than once, DUPLICATE MESSAGE is displayed at the beginning of the new message. The new duplicate message replaces the older duplicate message and contains the latest time and date stamp.
1029B40Book Page 32 Tuesday, September 2, 1997 10:49 AM Battery Gauge A battery gauge indicator keeps you informed of the battery level. The indicators are listed on the card attached to the back cover. CARE AND USE Cleaning Your Pager To clean smudges and grime from the exterior of your pager, use a soft, non-abrasive cloth moistened in a mild soap and water solution. Use a second cloth moistened in clean water to wipe the surface clean. Do not immerse in water.
1029B40Book Page 33 Tuesday, September 2, 1997 10:49 AM The Advisor Elite pagers are durable, reliable, and can provide years of dependable service; however, they are precision electronic products. Water and moisture, excessive heat, and extreme shock may damage the pager. Do not expose your pager to these conditions. If repair is required, the Motorola Service Organization, staffed with specially trained technicians, offers repair and maintenance facilities throughout the world.
1029B40Book Page 34 Tuesday, September 2, 1997 10:49 AM Battery Information Your pager is designed to operate with a single AA-size alkaline battery (carbon zinc batteries are not recommended). See the diagram on the following page for the battery door location. BATTERY Installing/Replacing the Battery To install or replace the battery, hold the pager face down and proceed as follows: ➊ Unlock the battery door by sliding the door latch away from the battery door.
1029B40Book Page 35 Tuesday, September 2, 1997 10:49 AM ➊ ➋ Advisor Elite Pager Battery Replacement (rear view) To install a new battery, reverse this procedure, taking note of the positive (+) and negative (-) markings. CAUTION: Do not insert the battery backwards or all messages will be erased.
NOTES 1029B40Book Page 36 Tuesday, September 2, 1997 10:49 AM
NOTES 1029B40Book Page 37 Tuesday, September 2, 1997 10:49 AM
1029B40Book Page 38 Tuesday, September 2, 1997 10:49 AM Patent Information BATTERY This Motorola product is manufactured under one or more Motorola U.S. patents. These patent numbers are listed inside the housing of this product. Other U.S. patents for this product are pending. t, Motorola, Advisor Elite, and F are trademarks or registered trademarks of Motorola, Inc. © 1997 by Motorola, Inc. All Rights Reserved. Paging Products Group 1500 Gateway Blvd., Boynton Beach, FL 33426-8292 Printed in U.S.A.
1029B40Book Page 1 Tuesday, September 2, 1997 10:49 AM Advisor Elite™ Quick Reference Card Turning Your Pager On Press J. Turning Your Pager Off ➊ From the Function Menu, press H to move the cursor to q. ➋ Press K twice. Function Menu Provides access to the features described in this quick reference card and in your user’s guide. ➊ Press K. ➋ Press H or I to move within the Function menu. Receiving/Reading Messages ➊ Press any button to stop the alert. ➋ Press J to display your message.
1029B40Book Page 2 Tuesday, September 2, 1997 10:49 AM Setting the Time and Date ➊ From the Function menu, press H to ➋ ➌ ➍ ➎ ➏ move the cursor to v. Press K. Press I to move the cursor to the hour digit. Press F or G to adjust the hour. Repeat steps 3 and 4 to adjust the minutes, AM/PM/24 hr., month, day, and year. Press K to activate the setting. Setting Alarms ➊ From the Function menu, press H to move the cursor to v. ➋ Press K. ➌ Press G. ➍ Press I to move the cursor to the alarm symbol.
1029B40Book Page 3 Tuesday, September 2, 1997 10:49 AM Storing Messages in Your Notebooks ➊ From the message-status screen, press F , G, H, or I to move the cursor to the message you want to move into the notebook. ➋ Press K. ➌ Press I to move the cursor to u. ➍ Press K to store the message. Private Time On ➊ From the Function menu, press H to move the cursor to 3. ➋ Press K. ➌ Press and release G until 3 is displayed. ➍ Follow steps 3 and 4 in Setting theTime and Date to set the on and off times.
1029B40Book Page 4 Tuesday, September 2, 1997 10:49 AM INTRODUCTION Message Status Symbols g j V m n b u Locked Message Maildrop Alert Enabled Maildrop Alert Disabled Personal Message Memory Full Alarmed Message Notebook Function Menu Symbols l v 3 1 4 r s 2 a A C g h j Choose Alert Set Time and Alarm Set Private Time Display Zoom On Display Zoom Off Set Silent Alert Set Audible Alert Turn Pager Off Escape (to Message-status screen) Delete Message Delete All Messages Lock Message Unlock Message Turn
