User guide

Advanced Features

English

Tactical Public Safety(TPS) (Conventional

Only)

Using TPS Normal Transmission

TPS enabled the users of a group to identify a transmission

starts and ends clearly by displaying the caller’s name or ID on

the radio display.

Procedure:

1 At TPS Zone Channel

Press PTT button to transmit.Talk clearly into the

microphone. Release PTT button to listen.

Receive and listen to call, the radio displays the caller’s

name or ID.

Using TPS Emergency Transmission

Emergency Beacon – During Emergency if the TPS radio user

pushes the Emergency button, the radio sounds a Beacon at

the maximum volume of the radio at radio’s internal speaker

and it is not adjustable. This beacon goes to silent when user

presses the PTT button for voice transmission.

Emergency Call De-Key Sidetone – The radio sounds an alert

tone to remind radio user that the Emergency Mode is still

active after user releases the PTT button for an Emergency call

transmission. The volume of loudness depends on the

maximum tone at your radio profile.

Procedure:

1 Press the Emergency button to enter Emergency Mode.

You hear Emergency Beacon.

2 Press PTT button to make Emergency Call.

3 Release to listen. You hear Emergency Call De-Key

Sidetone. After a short pause, you hear Emergency Beacon.

4 Long press Emergency button to exit Emergency mode and

cancel Emergency Beacon.

