user manual

4 MW810 Mobile Workstation Vehicle Installation Manual
Installation
This section describes the tools and equipment, planning requirements, and product
inspections necessary for a smooth installation of the MW810 Mobile Workstation. Proper
planning will help to ensure that the installation is completed without difficulty and that no
damage occurs to the units or the vehicle.
Unpacking
Unpack your shipment and check the contents to ensure that you have received all the
specified items.
Thoroughly inspect the equipment for shipping damage
as soon as possible after delivery.
Report any damage you find to your Motorola Solutions Customer Service representative
immediately.
Save the packing carton and anti-static plastic ba
g
s for storage and shipping. Both the
shipping carton and the anti-static bags protect the MW810 Mobile Workstation components
from physical and electrostatic damage.
The following optional parts can
be u
sed to mount the MW810 Mobile Workstation:
• Display mount assembly - see “12.1“ Display” on page 14 and “8.4” Display” on page 18.
• CPU Box Mounting Trunnion for the MW810 Mobile Wo
rkstation CPU - See “CPU Box
Mounting Trunnion” on page 31.
• 3rd Party Mounts - http://www.havis.com/, http://www.gamberjohnson.com/,
www.rammount.com/, www.precisionmounts.com/
Preparing to Install the MW810 Mobile Workstation Inside the Vehicle
Tools
The following tools and service aids are required for installation:
• 3/8” nut driver
• 1/2”, 3/8” or 7/16” wrench
• No. 2 and 4 Phillips screwdriver
• Drill with 3/16” drill bit
The MW810 Mobile Workstation is a reliable product when installed
correctly. However, performance can be seriously impaired if it is not
installed correctly. Thoughtful planning can make the difference.
Please note that installing any part of the MW810 Mobile Workstation
must be according to the instructions provided in this manual.
Note
!
Warning