user manual

28 MW810 Mobile Workstation Vehicle Installation Manual

SIM Card Installation

The MW810 Mobile Workstation requires a SIM card to activate the WWAN radio. The SIM

card fits inside the Express Card & SIMs Compartment. The SIM card holds the MW810

Mobile Workstation identification information required for connecting to a cellular network.

To install a SIM card for the first ti

me,

perform the following steps:

Step 1. Open the Express Card & SIMs Compartment Door.

Step 2. Retrieve the SIM Card Drawers from a red

plastic bag inside the CPU Box package.

Step 3. Install the two SIM Card Drawers inside the

Express Card & SIMs Compartment.

Verify that the left drawer indicates SIM1 and the right drawer indicates SIM2. Slide-

in the drawers and verify that they are locked in place.

Step 4. Press the Eject Button of SIM1 Card Drawer

(for WWAN1 radio) and slide-out the

SIM Card Drawer.

Step 5. Place the SIM Card inside the SIM1 Card

rawer. Make sure that the gold plate of

the SIM card is facing up and the notch of the SIM card fits in the proper direction

inside the SIM1Card Drawer.

Step 6. Slide-in to lock the SIM1 C

ard Drawer.

Step 7. Close the Express Card & SIMs Compartment Door.

Before installing the SIM card, verify that MW810 Mobile

Workstation is turned off. 

Inserting or removing the SIM card when MW810 Mobile

rkstation is running can corrupt the SIM card information.

Caution

Figure 21

CPU Box - SIM Cards Installation

SIM1 Card Drawer

SIM Drawer Eject Button

Express Card & SIMs Compartment Door

SIM2 Card Drawer

(currently not in use)