Cordless Telephone User Manual

Phonebook 31
OR
You can also display the first entry in the directory by
pressing
P twice, then pressing P again to choose
>REVIEW .
2. Press , to browse through the directory. Entries will
be displayed alphabetically by the first letter in the
name.
4.2 Add an Entry
1. Press P when in idle mode to enter the feature menu.
2. Press P again to enter >DIRECTORY menu.
3. Press , to select >STORE .
4. Press P.
5. Enter the telephone number when prompted.
• Use the keypad to enter up to 30 digits.
– Press , to move the cursor to the right or left.
– Press
/ to erase digits.
– Press and hold
/ to erase all digits.
– Press and hold
. to enter a three-second dialing pause.
OR
• Copy a number from redial by pressing
. then press
,, or pressing . repeatedly to locate the number to
copy. Press
P to copy the number.
6. Press P to save the number in the display. The display
will show
ALREADY SAVED if the number is already in the
directory. The same number cannot be saved twice.
7. Enter the name when prompted.
• Use the keypad to enter a name (up to 15 characters).
Each time a key is pressed, the character on that key
will be displayed. Additional key presses will produce
other characters on that key. Please refer to the
character map in section 2 before.
– Press , to move the cursor to the right or left.
– Press
/ to erase letters.
– Press and hold
/ to erase all letters.
8. Press P to store your new directory entry. The name
and the telephone number will then be shown on the
screen.