USER’S GUIDE Wi-Fi® Video Baby Monitor Camera Models: BLINK1.1-W, BLINK1.1-B, BLINK1.1-S, BLINK1.1-R The features described in this user’s guide are subject tomodifications without prior notice.
Welcome... to your new Motorola Video Baby Monitor Camera! Thank you for purchasing your Motorola Wi-Fi® Video Baby Monitor Camera. Now you can view and hear your baby sleep in its room or you can monitor your older children in their playroom. You can install the Camera only from your iPhone®/iPad® or devices for Android™ and view the Camera video from your PC or Notebook, as well as devices for Android™ or iPhone®/iPad®. Please keep your original dated sales receipt for your records.
Overview of your Camera 1 2 8 3 4 5 9 7 6 1. 2. 3. 4. 5. Photo Sensor (for night mode detection) Infrared LEDs (for night vision) Camera Lens Power/Status LED Microphone 10 11 Speaker ON/OFF Switch 8. Antenna 9. Temperature Sensor 10. Power Adapter Connector 11. Reset Button 6. 7. Important guidelines for installing your Wi-Fi® Camera Unit • Use of other 2.4GHz products, such as other wireless networks, Bluetooth® systems or microwave ovens may cause interference with this product.
Table of contents 1. 2. 3. Safety Instructions ..................................................................................... 5 System Requirements ............................................................................... 7 Getting started - Connecting Devices...................................................... 8 3.1 3.2 3.3 4. Camera .................................................................................................... 32 4.1 4.2 4.3 4.4 4.5 4.6 4.7 5. 6. 7. 8. 4 Setup...
ENGLISH 1. Safety Instructions WARNING: STRANGULATION HAZARD - Keep the adapter cord out of the baby’s reach. NEVER place the Wi-Fi® Camera Unit or cords within a crib. Secure all cords some distance away from the baby’s reach. Never use an extension cord with AC Adapters. Only use the AC Adapters provided. Wi-Fi® CAMERA UNIT SET UP & USE: ● Determine a location for the Wi-Fi® Camera Unit that will provide the best view of your baby in the crib.
• Adult assembly is required due to small parts. Keep all small parts away from children. • This product is not a toy. Do not allow children to play with it. • This Wi-Fi® Camera Unit is not a substitute for responsible adult supervision. • Keep this user's guide for future reference. • Do not place the Wi-Fi® Camera Unit or cords in the crib or within reach of the baby (the unit should be at least 3 feet away). • Keep the cords out of reach of children.
ENGLISH 2. System Requirements Web Portal • Windows® systems, 7 or 8 (Java browser plug-in needed) • Windows® system XP Service Pack 3 or above • Mac OS® version 10.7 or above • Internet Explorer® version 8.0 or above • Firefox® version 11.0 or above • Chrome™ version 18.0 or above • Safari® version 5.1 or above • Java™ version 7 or above Android™ System • Version 2.3.6 or above iPhone®/iPad® iOS • Version 4.
3. Getting started - Connecting Devices How does it work? Access your Camera locally View your Camera from any compatible device remotely • The Monitor Everywhere Server keeps track of the Cameras. • When a user wants to access the Camera, the server authenticates the user and permits the user access to the Camera. 3.1 Setup Connect the Camera to the power adapter and plug into an electrical outlet and make sure the power switch is in the ON position.
User Account and Camera Setup: Working with devices for Android™ • Download and install the application "Monitor Everywhere" from the Google Play™ application (picture S1) S1 Note: If you can't find the application, then use your device browser to go to www.monitoreverywhere.com for instructions on how to install. • Turn on the Wi-Fi® on your Android™ device and select your wireless network. (picture S2) S2 Getting started - Connecting Devices 9 ENGLISH 3.
• Switch the Camera to on, wait until the green light starts to blink, tap to run the "Monitor Everywhere" App. (picture S3) S3 • Run the "Monitor Everywhere" application. After initialization, the Baby Monitor Setup wizard will appear.
ENGLISH • Follow the on-screen instructions and select the Camera, next select the Wi-Fi® connection that will be used. Tap Connect to Wi-Fi.
• Enter the router password, tap on Connect, next tap on Next Step. (picture S7) S7 • Tap Create Account.
S9 • Review the terms & conditions and select I agree. (picture S10) S10 Getting started - Connecting Devices 13 ENGLISH • Enter user name, password, and email address. Next select Signup.
• Tap Next Step. (picture S11) S11 • Follow the on screen checklist to ensure that your Camera is power connected to power and then tap Next.
Note: The Camera SSID is printed on a label on the bottom of the Camera, for example: ID: Camera-31a0c2. On the device for your Android™ you will see: Camera-31a0c2. S13 • Select your preferred router to connect the Camera. (picture s14) S14 Getting started - Connecting Devices 15 ENGLISH • Select the Camera from the list.
• You can choose to rename the Camera here. Next tap Done. (picture S15) S15 • To complete setup, tap Start Monitor.
ENGLISH • Tap on VIEW to show the Camera view and other Camera controls. (picture S17) S17 If you cannot find the camera ID on the list, or installation fails, please reset the Camera with the following procedure: 1. 2. 3. 4. 5. 6. Slide the ON/OFF switch to ON. Press and hold the RESET button on the underside of the Camera for 5 seconds, until you hear a beep. Release the RESET button and wait for the Camera to complete the internal reset procedure. After about 60 seconds you will hear two short beeps.
3.3 User Account and Camera Setup: Working with iPhone®/iPad® • Install the application "Monitor Everywhere" from the App StoreSM. (picture S1) S1 Note: If you can't find the application, then use your device browser to go to www.monitoreverywhere.com for instructions on how to install.
ENGLISH • Tap Setup Monitor Everywhere for first time user. (picture S3) S3 • Tap Continue.
• Enter a user name, a password (of at least 8 characters), re-enter the same password and an e-mail address. • Tap Done, by which you are agreeing to the Terms of Use. (picture S5) S5 • Tap Setup Monitor.
• Tap Continue (picture S7) S7 • Follow the below pictures S9 through S14 to guide you through setup on your iPhone®/iPad®. You will be instructed on how to set up the Wi-Fi® and the Camera.
• Press the Home button. (picture S9) S9 • Tap the Settings icon.
ENGLISH • Tap the Wi-Fi bar. (picture S11) S11 • Double tap the Camera from the network list and wait until it is connected. (picture S12) Note: The Camera SSID is printed on the label on the bottom of the Camera, for example: ID: Camera-121365. On your iPhone®/iPad®, you will see: Camera121365.
• Press the Home button. (picture S13) S13 • Tap the Monitor Everywhere icon.
ENGLISH • Tap Configure Camera to Wi-Fi. (picture S15) S15 • Select the Wi-Fi® connection that your Camera will use.
• Enter the Wi-Fi® password and re-enter for the Camera, then tap Next. (picture S17) S17 • Follow pictures S19 through S24 to guide you through the set up of Wi-Fi®, the router and how to exit the App.
ENGLISH • Press the Home button. (picture S19) S19 • Tap the Settings icon.
• Tap the Wi-Fi bar. (picture S21) S21 • Double tap your preferred Router until it is connected. (e.g.
ENGLISH • Press the Home button. (picture S23) S23 • Tap the Monitor Everywhere icon.
• Wait approximately 3 minutes. (picture S25) S25 • Tap Start Monitor.
ENGLISH • Tap on the Camera icon to start viewing. (picture S27) S27 If you cannot find the Camera ID on the list, or installation fails, please reset the camera with the following procedure: 1. 2. 3. 4. 5. 6. Slide the ON/OFF switch to ON. Press and hold the RESET button on the underside of the camera for 5 seconds, until you hear a beep. Release the RESET button and wait for the Camera to complete the internal reset procedure. After about 60 seconds you will hear two short beeps.
4. Camera 4.1 Connecting the Camera to Power • Insert the small end of the Power Adapter into the Power Adapter Connector and plug the Power Adapter into a electrical outlet. • Slide the ON/OFF switch to ON, the green Power LED will light up. (Note: To switch the device off, slide the ON/OFF switch to OFF.) 4.2 Camera Functions: Working with PC/Notebook • Go to URL: https://www.monitoreverywhere.com • Enter the User Name and Password and then tap LOGIN, if you have already created an account.
ENGLISH Play Lullaby: Tap the icon to show the Play Lullaby menu. Select one of the five songs to play the lullaby. Tap Music OFF to stop playing. Speaker: Tap the icon to turn audio monitoring ON or OFF. Photo/Video: Take a picture or record a video and select the space where it should be saved on your computer. Camera Settings: Under Display, adjust the Video Quality. Move the sliders from left (-) to right (+) to adjust Contrast, Brightness, and Volume.
4.3 Viewing another Camera: Working with PC/Notebook • Tap VIEW OTHER CAMERA to view the Camera list and then pick your choice. 4.4 Camera Functions: Working with devices for Android™ • Run the "Monitor Everywhere" application. • Enter the User Name and Password and then tap Login, (if you need to register new account see 3.2 Getting Started/Connecting Devices User Account and Camera Setup). • Tap to change the Camera name or remove a Camera from the list.
Camera Settings: Change Name, Adjust Camera Volume, Adjust Camera Brightness, Adjust Sound Sensitivity Level 1 (Low): a loud noise is required. Level 4 (High): a low noise will trigger the notification sent to devices for Android™), Change Temperature Unit, Adjust Video Quality, Remove Camera, Show Information. Notifications: Turn ON/OFF the notification function for Sound and Temperature Alert. Lullaby: Tap the icon to show the Lullaby menu. Turn music ON and select one of the five songs.
Temperature: The display will always show the current room temperature. Video Quality: Press once to toggle between QVGA (low resolution, gray HQ color) and VGA (high resolution, white HQ color). • Press the Menu button of your device for Android™ and select Logout to leave the account. 4.5 Adding another Camera: Working with devices for Android™ • To add another Camera, please follow the screen number sequence: A1 A2 • Tap Next.
ENGLISH A3 A4 • Select your Camera (picture A3) and then select your preferred Wi-Fi® network. (picture A4).
• If requested, enter your network password (picture A5). • Please be patient, it may take a few minutes until your Camera is added to your account (picture A6). • Once the Camera has been added, the Camera view will be automatically displayed. Note: When you are accessing your Camera via a network different from your home network (over internet) by mobile (such as devices for Android™ or iPhone®), the following message will periodically pop up: "This video has been viewed for about 5 minutes.
Camera Settings: Change Camera Name, Adjust Camera Volume, Adjust Camera Brightness, Adjust Sound Sensitivity to trigger notification or Disable the monitor devices microphone to avoid notification, Change Temperature Unit, Set Video Quality, Remove this Camera, Show Information. • Tap on Back to return to the Camera control icons. Lullaby: Tap the icon to show the Lullaby menu. Turn music ON and select one of the five songs. Turn music OFF to stop playing.
Tap Cameras to return to the Camera list. Tap on to add another Camera to the list. • Tap on Edit: • Tap Remove to take a Camera off the list. • Tap Rename to give a Camera a new name. • Tap Alert Settings to receive notifications if a noise is detected or the temperature in your baby's room is too high or too low. • If you use Alert Settings, under Settings on your iPhone®/ iPad®, select Notifications > Baby Cam > Notification Center ON.
Note: If your Camera is moved from one router (e.g. home) to another router (e.g. office) or you have Camera setup issues, then this Camera must be reset again. Please reset the Camera with the following procedure: 1. 2. 3. 4. Slide the ON/OFF switch to ON. Press and hold the RESET button on the underside of the Camera for 5 seconds, until you hear a beep. Release the RESET button and wait for the Camera to complete the internal reset procedure.
6. Help Noise interference To avoid background noise or echoes, ensure that there is enough distance between your device and the Wi-Fi® Camera Unit. Use of other 2.4 GHz products, such as Bluetooth® systems or microwave ovens, may cause interference with this product. Keep the Wi-Fi® Camera Unit at least 5ft away from these types of products, or turn them off if they appear to be causing interference. Lost connection Check your Wi-Fi® settings. If necessary reconnect your Wi-Fi®.
The e-mail might have been sent to your Junk Mail Folder. Please check your Junk Mail Folder. There might be a delay in getting your e-mail. Please wait a few minutes and refresh your email account. 1. Connectivity I get a message: We Issues are having problems accessing your camera. This could be due to lack of internet 2. connection. Please wait and try again later. 3. Please try again in a few minutes. This could be because of any issue with your internet connection.
Connectivity My Phone application Issues displays the following message: "Unable to connect to BMS server". 1. 2. 3. Check the Wi-Fi® network strength. Check if you are connected to the internet by starting the phone browser and going to a website like www.google.com. Try again if you are successful connecting to the internet. Setting Up While I am adding a new camera to my account, I am not able to find any Cameras to add.
What is the significance of LED flashing? A blinking LED indicates the following status: Fast blinking: Your Camera is in setup mode. You can add the Camera to your account in this mode. Out of the box, the Camera is in setup mode. To reset to setup mode, press and hold the RESET button on the bottom of the Camera untill you hear a long beep. Slow blinking: The Camera is either connecting to the router or lost the link to the router. Please ensure that the Camera is in the Wi-Fi® signal range.
Connectivity Even though I am Issues accessing my Camera from the same Wi-Fi® network, I still find my Camera is shown as remote. I can only access it for 5 minutes at a time. Please check your wireless router settings. For example, in Buffalo brand routers there is an option called Wireless Isolation. Please disable this option. Camera When I try to view the Camera, I get a prompt for Camera firmware upgrade. What should I do? Please upgrade your firmware. This takes around 5 minutes.
You can tap on the speaker icon in the I do not hear sound when I am accessing a video stream screen to hear audio. By default the audio is not ON when you remote Camera. are accessing a remote Camera. General What is the meaning of When you are accessing your camera from the same wireless network (Home) "Local Camera" and in which it is configured, "Remote Camera"? it is a local camera. When you are accessing your Camera away from your home it is a remote camera.
General I am having problems accessing my Cameras from Google Chrome™. What should I do? The following links take you to the troubleshooting guide for Safari on Mac®. https://monitoreverywhere.com/ BMS/troubleshoot.jsp?javadisabledsf https://monitoreverywhere.com/ BMS/troubleshoot.jsp?nojavasf You need to be on Internet Explorer® version 8.0 or above. Please upgrade your browser. You can also use Google Chrome™ to access. General I am not able to access my Cameras on Internet Explorer®.
How do I download the Android™: APP for Android™ and - Open Google Play APP on your iOS devices? Android™ device. ENGLISH General - Select Search - Type "Monitor Everywhere" - The results will have Monitor Everywhere APP by Binatone - select to install it. iOS Device: - Open iOS APP StoreSM - Select search - Type "Monitor Everywhere" - The results will have Monitor Everywhere APP by Binatone - Select to install it. Features Help I am having problems with PAN/TILT.
Features How many users can access the Camera at one time? 1. 2. 50 If you are accessing in Local mode (your Smartphone/PC is connected to the same network as your Camera), up to four users can view your Camera at the same time and a remote user is not allowed. Remote users trying to access the same Camera will get a 'camera busy' notification. If you are accessing in Remote mode (from an outside network different from where you have your Camera, e.g.
ENGLISH 7. General Information If your product is not working properly.... 1. 2. Read this User's Guide. Contact Customer Service at: US and Canada 1-888-331-3383 Email: motorola@encompass.com Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE").
What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services.
FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
WARNING Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible.
ENGLISH 8. Technical Specifications Camera Unit Wi-Fi® 802.11 b/g/n Image sensor Color CMOS Lens f 2.6 mm, F = 2.8 IR LED 8 pcs Power Adapter: By Ten Pao International Ltd. Input 100-240 VAC, 50/60 Hz, 0.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Mac, Mac OS, iPhone, iPad and Safari are the trademarks of Apple Inc., registered in the U.S. and other countries. Android, Google Play and Chrome are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance.
