Bluetooth Headset User Manual

ManualsBrandsMotorola ManualsHeadphoneBluetooth Handsfree Headset H700

motorola

Bluetooth

Handsfree Headset

Get connected in 4 quick steps.

H700

BEFORE YOU

BEGIN

Before using this product, read the Important Safety and

Legal Information pamphlet and follow its instructions.

Take a moment before you get started to

familiarize yourself with your new

H700 Headset.

Volume

Buttons

Boom

Multi-Color

Indicator Light

Call

Button

Microphone

Speaker

(on reverse

side)

Charge your headset's battery for 2 hours:

Plug the Motorola charger into the end of

the headset.

The indicator light turns red when the

battery is charging. It may take up to 1

minute for the indicator light to turn on.

When the headset's battery is fully charged

(about 2 hours), the indicator light turns

green.

Disconnect the charger.

CHARGE YOUR

HEADSET

Note: Headset is not functional while charging.

ENSURE YOUR

HEADSET IS IN

PAIRING MODE

Indicator Light

(steadily purple

for pairing mode)

Before you can use your headset, you must pair

(link) it with your phone.

Open the headset boom to initiate easy

pairing. After a few moments, the indicator

light will be steadily lit in purple to indicate

headset is in pairing mode.

If the headset does not enter pairing mode,

see TROUBLESHOOTING for help.

Summary of content (5 pages)

PAGE 1
motorola Bluetooth Handsfree Headset BEFORE YOU BEGIN ® Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. Take a moment before you get started to familiarize yourself with your new H700 Headset. Multi-Color Indicator Light Boom Microphone Volume Buttons H700 1 Speaker (on reverse side) Get connected in 4 quick steps.
PAGE 2
TROUBLESHOOTING My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is flashing in blue, turn off the other device, then close and reopen the headset boom. The indicator light becomes steadily lit in purple indicating the headset is now in pairing mode. My phone doesn't find my headset. Make sure the indicator light on your headset is on (lit in purple) and steady when your phone is searching for devices (see step 2).
PAGE 3
4 TEST AND USE Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call: 1 Place the headset over your ear. See "Wearing the Headset" on the reverse side of this guide. USING YOUR H700 See Features and Functions Guide on the reverse side for information on using your H700 2 On your phone, dial the number you want to call and press the Send key.
PAGE 4
WEARING THE HEADSET 1 Open the headset boom, then open the earhook. 2 Loop the earhook over your ear. 3 Press the headset to your ear. 4 Point the headset boom towards your mouth. CHANGING FOR USE ON OTHER EAR You can wear your H700 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear: 1 Open the headset boom, then open the earhook (90° from the headset). 2 Gently lift and pull the top of the earhook up and off the upper hinge pin.
PAGE 5
MAKING CALLS MAKING CALLS CONTINUED Function Action Function Action Make a voice dial call Tap the Call button and speak the name after the tone Answer a second incoming call Press and hold the Call button (places first call on hold) End a call Tap the Call button Answer a call Open headset boom or tap the Call button (if boom is already open) Toggle between two active calls Press and hold the Call button Join a 3-way call Press and hold both Volume buttons Put an active call on hold or re