user manual

71
Using GPS with Map Software
Getting Started
To connect your handset to your laptop or other
device:
1 Open the flap covering the handset’s accessory
connector.
2 With the handset’s display facing up, insert the
data cable’s connector into the accessory
connector, until you hear a click.
3 Insert the data plug into the COM port of your
laptop or other device.
Make sure no other application is using the COM
port selected.
Make sure the COM port settings of your laptop or
other device are set to the following:
• Bits per second: 4800
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: Hardware
To set your handset to send location information to
your laptop or other device:
1 From the main menu, select GPS > Interface.
2 With NMEA OUT highlighted, press A under
Change.
3 Scroll to On.
4 Press A under Select. Your handset is now
sending location data to your laptop or other
device.
To stop your handset from sending location data to
your laptop or other device:
Set NMEA OUT to Off and press A under
Select.
flap