user manual

ManualsBrandsMotorola ManualsBluetooth HeadsetBluetooth Headset T305

motorola

Portable Bluetooth

Hands-Free Speaker

Get connected in 4 quick steps.

T305

BEFORE YOU

BEGIN

Before using this product, read the Important Safety and

Legal Information pamphlet and follow its instructions.

Take a moment before you get started to

familiarize yourself with your new

T305 Portable Bluetooth Hands-Free Speaker.

Multi-Color

Indicator Light

and Call Button

Microphone

Power

Button

Volume

Down (-)

Button

Speaker

Volume

Up (+)

Button

(on side)

Charging

Port

CHARGE YOUR

HANDS-FREE SPEAKER

Charge your hands-free speaker's battery for

2 hours:

Plug the Motorola charger into the charging

port on the end of the hands-free speaker.

The indicator light turns steadily red when the

battery is charging and the hands-free speaker

is turned off. It may take up to 1 minute for the

indicator light to turn on. When the hands-free

speaker's battery is fully charged (about 2

hours), the indicator light turns steadily blue.

Disconnect the charger.

Note: Hands-free speaker is functional while charging;

however, when charging the hands-free speaker while turne

on, the indicator light does not provide charging status.

Note: Do not place hands-free speaker with clip installed

on visor when charging.

START BLUETOOTH

FEATURE

Yo u r P h o n e

Press (

Menu) > Settings > Connection >

Bluetooth Link > Setup.

Scroll to Power.

Select Change.

Scroll to On.

Press Select to turn on the Bluetooth

feature. The Bluetooth feature remains on

until you turn the feature off.

Note: These steps are for most Motorola phones. For

other phones, see your phone's user's guide.

Yo u r p h o n e ' s B l u e t o o t h fe a t u r e i s o ff b y d e f a u l t .

To us e you r h a nd s- fr ee s pe aker, yo u m us t tu rn

on the Bluetooth feature in your phone.

For most Motorola phones (at the main menu):

Summary of content (5 pages)

PAGE 1
motorola Portable Bluetooth Hands-Free Speaker BEFORE YOU BEGIN ® Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. Take a moment before you get started to familiarize yourself with your new T305 Portable Bluetooth Hands-Free Speaker. Speaker Multi-Color Indicator Light and Call Button Volume Up (+) Button (on side) T305 1 Power Button Volume Down (-) Button Microphone Get connected in 4 quick steps.
PAGE 2
3 PAIR Your Hands-Free Speaker Before you can use your hands-free speaker, you must pair (link) it with your phone. Step A - ENSURE HANDS-FREE SPEAKER IS IN PAIRING MODE To initiate easy pairing, power on hands-free speaker by pressing and holding the Power button until the indicator light becomes steadily lit in purple. Release the button and, after a few moments, the indicator light will be steadily lit in blue to indicate hands-free speaker is in pairing mode.
PAGE 3
USING YOUR T305 See Features and Functions Guide on the reverse side for information on using your T305 TROUBLESHOOTING My hands-free speaker will not enter pairing mode. Make sure that any devices previously paired with the hands-free speaker are turned off. If the indicator light is flashing in blue, turn off the other device and wait for 10 seconds. The indicator light becomes steadily lit in blue indicating the hands-free speaker is now in pairing mode. My phone does not find my hands-free speaker.
PAGE 4
INSTALLING HANDS-FREE SPEAKER IN YOUR CAR Follow these steps to install your hands-free speaker in your car: INSTALLING HANDS-FREE SPEAKER IN YOUR CAR Continued 2 Slide the visor clip onto your sun visor. 1 Slide the visor clip onto the mounting bracket on the bottom of the hands-free speaker. To do this, place the loop end first onto the hands-free speaker and slide forward as shown below. When installed, the Power button must be facing toward you as shown.
PAGE 5
MAKING CALLS MAKING CALLS CONTINUED Function Action Function Action Make a voice dial call Tap the Call button and speak the name after the tone Answer a second incoming call Press and hold the Call button (places first call on hold) End a call Tap the Call button (if a call is on hold, tap twice to end all calls) Toggle between two active calls Press and hold the Call button Mute or unmute a call Tap both Volume buttons Receive a call Tap the Call button Reject a call Tap either Volume b