Operation Manual

25
Handset settings
5.4 Handset name
If you are using more than one handset with your C12A base, you can set a
personalized name for each handset to easily distinguish between them.
A name can be up to 10 characters long.
1. Press , scroll to HANDSET and press .
2. Scroll to NAME and press .
3. Enter the new handset name and press to conrm.
Delete the current name by pressing .
NOTE
The handset name will only be displayed for approximately 20 seconds
when no button is pressed. If you make a mistake, press
to delete the
last character or digit.
See “ENTERING NAMES” and “WRITING TIPS” on page 22.
5.5 Language
1. Press , scroll to HANDSET and press .
2. Scroll to LANGUAGE and press .
3. Press or to select your preferred language and press
to conrm.
5.6 Key beep
When you press a button on the handset keypad, you will hear a beep. You
can switch these beeps on or off.
1. Press , scroll to HANDSET and press . The display shows BEEP .
2. Press to select. The display shows KEYTONE .
3. Press to select.
4. Press or to select ON or OFF and press to conrm.
5.7 Battery low warning beep
When the battery is almost fully discharged, you will hear a warning beep
every minute during a call. You can switch these beeps on or off.
1. Press , scroll to HANDSET and press . The display shows BEEP .
2. Press to select.
3. Scroll to LOW BATTERY and press .
4. Press or to select ON or OFF and press to conrm.