Operation Manual

18
Using the phone
3. Using the phone
NOTE
Your handset will automatically time the duration of all external calls, the
call timer will display on the screen. When the call ends, the total duration of
your talk time is shown for 5 seconds.
3.1 Switch the handset on / off
Pressandhold toswitchthehandsetonoroff.
3.2 Calls
3.2.1 Make a call
1. Press
.
2. Whenyouhearthedialtone,dialthenumber.
3.2.2 Preparatory dialling
1. Dialthenumberrst.Ifyoumakeamistakepress
Clear todeletethe
lastdigit.
2. Press
,todialthenumber.
NOTE
To enter a pause (P) when pre-dialling, see page 23.
3.2.3 Make a call using quickdial keys
1. Pressandholdtherelevantkeypadnumbertodialthepre-stored
numberdirectly.
NOTE
To store a quickdial number, see page 26.
3.2.4 End a call
Press
,orplacethehandsetbackonthebaseorcharger.
3.2.5 Receive a call
Whenyoureceiveanexternalcall,thephoneringsand
External Call showson
thedisplay.
1. Ifthehandsetisoffthebasethenpress
toanswerthecall,orifthe
handsetisonthebasesimplyliftthehandsettoanswerthecall.
NOTE
If you prefer to press
when you lift up the handset to answer a call, you
will need to switch Auto Talk off, see page 37.
3.3 Adjust the earpiece volume
Duringacall,press or toincreaseordecreasethevolume.Thereare8
levelstochoosefrom.