Operation Manual

49
Using the answering machine
NOTE
Alternatively, you may use press the following keys on your handset during
playback:
Topause
Toresume
Torepeatmessage
Toplaypreviousmessage
Todeletecurrentmessage
Toplaynextmessage
11.14 Delete all old messages
Answeringmachinemessagesthatarenotdeletedareautomaticallysaved.
Newmessagesorexistingmessagesthathavenotbeenplayedbackcannot
bedeleted.
1. Press
Menu ,thedisplayshows Answer Machine ,press Select .
2. Scroll
to Delete Messages andpress Select .
3. Displayshows
Delete All Old Messages? Press Yes toconrmor No tocancel.
4. Press
toreturntostandby.
NOTE
If the memory is within 10 seconds of becoming full while a caller is leaving
a message, they will hear a single beep. If they are still talking when the
memory becomes full the caller hears two beeps and the machine will
hang up.
When the memory is full, the outgoing message will automatically be set
to Answer Only. You must delete old messages before the C2010 can record
new messages.
11.15 Remote access
Remoteaccessallowsyoutooperateyouransweringmachineandlistento
yourmessagesbycallingtheC2010fromanotherphone.
ThedefaultsettingisOn.
1. CallyourC2010.Whenyouheartheannouncement,press*.
2. Enteryour4digitremoteaccessPIN(defaultsetting=0000).Youwill
hearaconrmationbeep.
NOTE
You should change this code for additional security, see page 50.