Operation Manual

28 Caller ID and the Calls list
8. Caller ID and the Calls list
IMPORTANT
To use Caller ID, you must rst subscribe to the service from your network provider. A
subscription fee may be payable.
To ensure that the caller’s name is displayed, make sure you have stored the full telephone
number, including the area code in the phonebook.
If the caller’s number is stored in the phonebook, the name assigned to it will be displayed.
If the call is a withheld call,
PRIVATE will be displayed.
If the number is unavailable,
UNAVAILABLE will be displayed.
NOTE
The above display information will be dependent on your network support.
8.1 Caller ID
If you have subscribed to a Caller ID Service, you will be able to see your caller’s number
on your handset (provided it is not withheld) prior to answering the call. The display can
show the rst 12 digits or characters of the phone numbers and names.
If your caller’s name and number are stored in the phonebook and a number match is
found, you will see the caller’s name on the display instead.
8.2 Calls list
The Calls list stores details of your last 40 received calls, including the phone number and
date and time of the call.
The Calls list also alerts you when you have unanswered calls.
The caller’s details are stored in the Calls list whether or not you have answered the call.
The list is shared by all handsets registered to the base. When the list is full, and a new call
is received, the oldest entry will be deleted automatically.
When a new call is received in the Calls list,
icon will flash on the display in standby
mode to alert you. When you have viewed the new call,
icon disappears but icon will
remain.
8.2.1 View the Calls list
1. Press
d to open the Calls list. If there are no calls in the list. The display shows EMPTY .
2. Press
u
or d to scroll through the list.
• If the call was answered, icon is displayed as you scroll to the entry. If the call
was unanswered,
icon is displayed as you scroll to the entry. When you reach the
end of the list, the handset will beep.
• If the caller’s number exactly matches an entry stored in the phonebook, the
display will alternate between the name and the number. Press
m
to see the
caller’s number.