Operation Manual

39
Handset settings
5.Press toreturntostandby.
8.11 Auto talk
WithAutoTalkswitchedon,youcanansweracalljustbyliftingthehandset
offthebaseorcharger.Ifswitchedoff,you
willhavetopress toansweracall.
1. Press Menu ,scroll to Settings andpress Select .
2.
Set Handset ishighlighted.Press Select .
3.
Scroll to Auto Talk andpress Select .
4.
Scroll or to Off or On thenpress Select .
5.
Press toreturntostandby.
8.12 Key beep
WhenyoupressabuttonontheC5010Ahandset,youwillhearabeep.You
canswitchitonoroff.
1. Press Menu ,scroll to Settings andpress Select .
2.
Set Handset ishighlighted.Press Select .
3.
Scroll to Key Beep andpress Select .
4.
Scroll or to Off or On thenpress Select .
5.
Press toreturntostandby.
8.13 PABX access code
IftheC5010Aisconnectedtoaswitchboard,youmayneedtoentera
one-digitaccesscodeinthediallingsequencetobeabletoconnecttothe
outsideline.
Theaccesscodewillbedisplayedatthebeginningofanumberonthe
screen.Thecodecanbeupto4digitslong.
Theaccesscodewillnotbeusedwhenyoudialthenumbermanually(such
aswhenyouarenotdiallingfromthephonebook).Thisallowsyoutomake
callstootherswitchboardextensions.
1. Press Menu ,scroll to Settings andpress Select .
2.
Set Handset ishighlighted.Press Select .
3.
Scroll to PABX Access Code andpress Select .
4.
Scroll or to Off , On or Set Code thenpress Select .
Ifyouselect Set Code ,entertheswitchboardaccesscode
e.g.9thenpress Save .
5.
Press toreturntostandby.