Operation Manual

41
Base settings
4. Scroll or to All Handsets or Select Handset thenpress Select .
Ifyouchoose Select Handset ,allavailablehandsetsaredisplayed.
• Scroll or tothehandsetyouwantthenpress Select .
• Scroll or tothenumberofringsthatyouwanttoset: 2 , 4 or 6 Rings 
andpress Select .
5.
Press toreturntostandby.
9.5 Recall mode
RecallisusefultoaccesscertainnetworkservicesandPABX/switchboard
services.
ThedefaultrecallmodepresetintheC5010Aissuitableforyourcountry
networkandthereforeyoushouldnotneedtochangeit.
NOTE
The use of the C5010A cannot be guaranteed on all PABX.
1. Press Menu ,scroll to Settings andpress Select .
2.
Scroll to Set Base andpress Select .
3.
Scroll to Recall Mode andpress Select .
4.
Scroll or to Recall 1 or Recall 2 andpress Select .
5.
Press toreturntostandby.
9.6 Switch rst ring on/ off
Ifyouhavesubscribedtoyournetwork’sCallerIDservice,theC5010Awill
notringuntilthecallerinformationhasbeenreceivedanddisplayed.
However,ifyouwantyourhandsettoringwithoutwaitingforthecaller
informationtobedisplayed,setFirstRingtoOn.Pleasenotethatthiswill
meanthattherstringyouhearwillbethedefaultringtone.Itwillchangeto
theringtonethatyouhavesetoncethecallerinformationisdisplayed.
1. Press Menu ,scroll to Settings andpress Select .
2.
Scroll to Set Base andpress Select .
3.
Scroll to First Ring andpress Select .
4.
Scroll or to On or Off thenpress Select toconrm.
5. Press toreturntostandby.
9.7 Change the System PIN
TheSystemPINisrequiredwhenchangingcertainsettingsandfor
registration/de-registration.Thedefaultsettingis0000.Youcanchangethis
toyourownpreferrednumber(upto8digits).
WhenyouenteraPIN,thedigitsareshownas **** .