Operation Manual

46
Room monitior
11. Room monitor
YoucanuseyourC5010Ahandsettomonitorthesoundsinanotherroom.
Ifthesoundsreachacertainlevelthehandsetwillautomaticallydialoutto
apre-setexternalnumberortoanotherhandset.WhentheRoomMonitor
issettoOn,thehandsetwilldisplayRoomMonitorOnandonlythe
microphonewillbeactivetomonitorthesoundlevelsintheroom.Boththe
speakerandreceiverwillbesettoOffandthehandsetwillnotringifthereis
anincomingcall.
11.1 To switch Room Monitor On
1. Press Menu ,scroll to Extra thenpress Select . Room Monitor ishighlighted.Press
Select . Mode willbehighlighted.
2. Press Select ,scroll to On thenpressSelect. Set to ON isdisplayedfor2
seconds.
3.
Thehandsetreturnstoidlescreenanddisplayas Room Monitor On .Toswitch
offRoomMonitorpress Off .
4.
Press toreturntostandby.
11.2 To change the monitor level
ThemonitorlevelcanbesettoHighorLow,thedefaultsettingis“Low”.
ToincreasethesensitivityoftheRoomMonitor:
1. Press Menu ,scroll to Extra thenpress Select . Room Monitor ishighlighted.Press
Select . Mode willbehighlighted.
2. S croll to Level ,press Select andscroll or toselect Low or High setting.
3. Press toreturntostandby.
11.3 To set the dial out number
1. Press Menu ,scroll to Extra thenpress Select . Room Monitor ishighlighted.Press
Select . Mode willbehighlighted.
2. Scroll to Call  To andpress Select .
3.
Usethe or keytoselect External or Internal .
External
1.
Press Select and Enter Number :promptwillbedisplayed.
2. Enterthenumberandpress Save . Saved willbedisplayed.WhenRoom
Monitorisswitchedonandthesoundlevelreachesacertainlevelthe
numberwillbeautomaticallydialled.