Operation Manual

47
Room monitor
Internal
1.
Press Select andtheregisteredhandsetwillbelisted,forexample
“Handset2”.
2. Scroll or toselectthehandsettheRoomMonitorwillcallifthe
noiselevelsreachacertainlevel.
3. Press Select and Set to handset 2 isdisplayed.
NOTE
If only one handset is registered the display prompts “Not available” and
returns to the previous screen. You must register additional handsets before
the handsets will be displayed and make Internal calls.
If the Room Monitor is triggered to call a handset or number and the called
handset is on a call, an alert tone of 3 beeps will be heard.
IMPORTANT
This product is not intended for use as a baby safety device and is not a
substitute for adult supervision.