Operation Manual

9
Getting started
1. Plugthetelephonelinecordintothesocketmarked ontheunderside
ofthebase.
2. Plugthepoweradaptorintothesocketmarked ontheundersideof
thebaseandplugtheotherendintothemainspowerwallsocket.Switch
onthemainspower.
Installing and charging the handset
1. Removethebatterycoverfromthebackofthehandsetandinsertthe
rechargeableNi-MHbatterycellssupplied.Pleasenotethe’+’and’-’
markingsinsidethebatterycompartmentandinsertinthe
correctdirection.
2. Slidethebatterycoverbackintoplace.
3. Ifyouarechargingthebatteriesforthersttime,placethehandseton
thebasetochargeforatleast24hourscontinuously.
4. Whenthehandsetisfullycharged, iconwillappearsteadyonthe
display.Plugtheotherendofthetelephonelinecord(makesurethatone
endisalreadypluggedintothebase)intothetelephonewallsocket.
Connecting the handset and charger
(for multi-pack only)
Ifyouhavepurchasedamultiplepack,youwillneedtocarryoutthisprocess
forallthehandsetsandchargers.
1. Plugthepoweradaptorintothesocketmarked ontheundersideof
thechargerandplugtheotherendintothemainspowerwallsocket.
Press
down
1
Slide
2