User guide

Base settings 23
3. Enter the 4 digit PIN code (default = 0000) and press
m. The display shows CONFIRM? .
4. Press
m to confirm or B to return to the previous
menu. Your phone will restart automatically.
6.7 Emergency default
If you have lost your PIN code, you can still restore your
phone to its default settings.
1. Remove the batteries from the handset.
2. Press and hold
* while replacing the batteries. The
display shows
DEFAULT .
3. Press
m to confirm. Your phone will restart
automatically.
6.8 Area code setting
1. Press m, scroll d to SET UP and press m.
2. Scroll
d to AREA CODE and press m.
3. Enter the desired
AREA CODE (up to 6 digits) using
keypad and press
m to confirm.
Note
The area code is the STD code of the city (Area) where the
cordless is connected e.g. for Delhi: 11 please set "11..." in
the Area Code setting for Delhi.
The handset will filter the local area code (set by user) while
receiving or calling back the local number.
6.9 Default settings
Low battery beeps ON
Out of range warning beeps ON
Key beep ON
Auto answer ON
Internal melody 1
Internal volume 3
External melody 3
External volume 3
Base volume 3
Base melody 2
Ear volume 3
Phonebook Empty
Calls list Empty
Redial list Empty
PIN Code 0000
Dial Mode Tone
Flash Flash 2 (600 ms)
Area Code Blank
Keypad lock OFF