user manual

3 INSTALLATION
28
1. With an HDMI™ connection in place, power off the DCX3200 and then immediately
press the
MENU key on the remote control. This will display the main User Settings
menu. Move the cursor next to the “Additional HDMI Settings” option and press the
► key.
An example of the Additional HDMI™ Settings menu
The Additional HDMI™ Settings menu options are:
Setting Description
HDMI/DVI
Mode
The HDMI/DVI mode settings allow you to optimize the HDMI™ output to
work with both DVI-equipped televisions and HDMI™ equipped televisions.
By default, this option is set to HDMI. The options are used as follows:
• HDMI™ designates that an HDMI™ television is connected to the
DCX3200.
• DVI designates that a DVI television is connected to the DCX3200 (via
an HDMI-to-DVI adapter).
Color Space
The Color Space setting allows you to adjust the color space used by the
DCX3200 to generate the video signals on the HDMI™ output. By default,
this option is set to YCC 4:4:4. The options are used as follows:
• YCC 4:4:4 designates that the DCX3200 will generate video signals
within the YCC color space.
• RGB designates that the DCX3200 will generate video signals within
the RGB color space.
Note 1: Adjusting these settings could result in a loss of video. Only a
professional installer or someone with a good working knowledge of the
color spaces supported by the TV should change this setting.