Switch User Manual

Cajun P880 Routing Switch Installation Guide 1 - 15
Table 2. Cable Pinouts
Recommended Cable
Distances
* Note: The following guidelines are based on IEEE 802.3z Draft
Document, version 3.2.
Table 3. Gigabit Fiber Cable Distances
* The TIA 568 building wiring standard calls for 160/500 MHz*km multimode fiber.
** The international ISO/IEC 11801 building wiring standard calls for 200/500
MHz*km multimode fiber.
*** The ANSI Fibre Channel specification calls for 500/500 MHz*km 50 micron
multimode fiber and 500/500 fiber will be proposed for addition to ISO/IEC 11801.
# Subject to DMD distortion - be sure to use Offset Cabling.
Pinout to 10Base-T Cables Pinout for RS-232 DB-9
Female Console Port
Pin # Signal
Description
Pin # Signal
Description
1 Receive data (+) 1 DCD (output)
2 Receive data (-) 2 TX (output)
3 Transmit data (+) 3 RX (input)
4 Not used 4 DTR (input)
5 Not used 5 SGD (ground)
6 Transmit data (-) 6 DSR (not used)
7 Not used 7 RTS (not used)
8 Not used 8 CTS (output)
N/A N/A 9 RI (not used)
Standard Fiber
Type
Diameter
(microns)
Modal
Bandwidth
(MHz*km)
Minimum
Range
(meters)
1000BASE-SX MM 62.5 160 2 to 220
*
1000BASE-SX MM 62.5 200 2 to 275
**
1000BASE-SX MM 50 400 2 to 500
1000BASE-SX MM 50 500 2 to 550
***
1000BASE-LX MM 62.5 500 2 to 550
#
1000BASE-LX MM 50 400 2 to 550
#
1000BASE-LX MM 50 500 2 to 550
1000BASE-LX SM 9 NA 2 to 5000
1000BASE-SLX SM 9 NA 2 to 10000