Switch User Manual

2
Cajun P880 Switch Installation Guide
C
cable distances, recommended, 1 - 15
cable management bracket
installation, 1 - 17
cables
installation, 1 - 14
category
10/100 port parameter, 2 - 14
gigabit port parameters, 2 - 11
category 5 cables, 1 - 14
Cisco Catalyst 5000 parameters
port VLAN, 2 - 25
Cisco Catalyst 5000, parameters
automatic VLAN creation, 2 - 25
trunk mode, 2 - 25
VLAN binding, 2 - 25
VTP snooping, 2 - 25
CLI
regaining access, 2 - 33
communities
configuring SNMP, 2 - 28
SNMP, 2 - 28
community string
configuring SNMP, 2 - 28
SNMP communities parameters, 2 - 28
Components, 1 - 1
configuration
invalid copies, 2 - 57
configuration file management
copy destination, 2 - 55
copy source, 2 - 54
destination filename, 2 - 55
save running configuration to startup
configuration, 2 - 54
source filename, 2 - 54
TFTP server IP address, 2 - 55
configuration files, 2 - 51
configuration revision number
VTP snooping parameters, 2 - 24
configure ports
gigabit module, 2 - 10
configuring a Fast Ethernet module, 2 - 12
configuring a redundant element, 2 - 50
configuring fast start mode, 2 - 27
configuring flow control mode
gigabit module, 2 - 10
configuring physical port parameters
gigabit ports, 2 - 11
configuring port name
Fast Ethernet module, 2 - 12
configuring port VLAN parameters, 2 - 21
configuring service port
gigabit module, 2 - 10
configuring the PPP console static route,
2 - 36
configuring the serial port console
PPP console, 2 - 32
configuring the temperature system, 2 - 46
configuring user port
gigabit module, 2 - 10
configuring VTP snooping, 2 - 23
connecting a modem, 2 - 31
connecting the power supplies
installation, 1 - 12
console serial port
changing, 2 - 30
console serial port configuration
PPP (Layer 3 only), 2 - 30
TTY (Layer 3 and Layer 2), 2 - 30
console serial port settings, changing
baud rate, 2 - 30
data bits, 2 - 30
flow control, 2 - 30
parity, 2 - 30
stop bits, 2 - 30
Contacing Lucent, x
controller redundancy
enabling, 1 - 21
conventions, viii
cooling system status
displaying, 2 - 47
Copper Cable Lengths, 1 - 16
copy destination
configuration file management, 2 - 55
copy source
configuration file management, 2 - 54
copying
configuration
invalid combinations, 2 - 57
from the switch or server to a configura-
tion file, 2 - 53
running configuration to startup
configuration, 2 - 53
startup configuration to running
configuration, 2 - 53
to a TFTP server, 2 - 53
to the switch, 2 - 53