Powerline MU User Guide

Powerline MU
Page 57 of 112
with the NEK on the Gateway. Only the Hybrid Adapter that is connected to the Gateway
can be changed.
To change the NEK of the Hybrid Adapter that connects to the Canopy SM or other
broadband access device, physically carry that Hybrid Adapter to the Gateway and plug it
in to the Ethernet jack. Enter the MAC address of the Hybrid Adapter and the desired
NEK. Be sure both Hybrid Adapters in the system have matching NEKs. Select Apply.
Powerline MU Hybrid Adapter Administration Utility
If desired, you can connect the Hybrid Adapter to a computer and change the NEK for
that device using the Hybrid Adapter Administration Utility. This utility is supplied on the
CD that is in the box with the Powerline MU Hybrid Adapter.