Motorola CD2 Digital Cordless Phone For CD201, CD202, CD203 and CD204 Warning Use only rechargeable batteries.
Welcome... to your new Motorola CD2 Digital Cordless Phone! • • • • • • • • • All handsets fully cordless for locating anywhere within range. 100 Name and number phonebook. Copy phonebook entries between other handsets. Caller Display shows you who's calling and see details of the last 50 callers in a Calls list.* Register up to 5 handsets to a single base and register each handset with up to 4 different bases.
This User Guide provides you with all the information you need to get the most from your phone. Before you make your first call you will need to set up your phone. Follow the simple instructions in `Getting Started', on the next few pages. IMPORTANT Only use the telephone line cord supplied. This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services.
1. Getting started ................................................6 2. Getting to know your phone ..........................9 3. Using the phone............................................14 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 Make a call...................................................... 14 Pre-dial ........................................................... 14 To make a call using fast call keys ................. 14 Call from the phonebook.................................
7. Personal settings ......................................... 25 7.1 Handset tones ................................................. 25 7.1.1 Ring volume ........................................... 25 7.1.2 Ring melody ........................................... 25 7.1.3 Group melody ........................................ 25 7.1.4 Key tones on/off ..................................... 26 7.1.5 First ring ................................................. 26 7.2 Base ringer ...............................
1. Getting started out of range of the base. Move back within in range. The handset will automatically re-connect to the base. WARNING Do not place your CD2 in the bathroom or other humid areas. Setting up Location You need to place your CD2 base within 2 metres of the mains power socket and telephone socket so that the cables will reach. Make sure it is at least 1 metre away from other electrical appliances to avoid interference. Your CD2 works by sending radio signals between the handset and base.
Plug the mains power cable with the clear connector into the socket marked on the underside of the base and plug the other end into the mains power wall socket and switch the power on. Connecting the handset and charger (Multipack only) If you have purchased a multiple pack, this process will need to be carried out for all handsets and chargers: 1. Plug the mains power cable with the red connector into the socket marked on the underside of the charger. 3.
Note that new batteries do not reach full capacity until they have been in normal use for several days. To keep your batteries in the best condition, leave the handset off the base for a few hours at a time. Running the batteries right down at least once a week will help them last as long as possible. The charge capacity of rechargeable batteries will reduce with time as they wear out, giving the handset less talk/ standby time. Eventually they will need to be replaced.
2. Getting to know your phone A Overview of your handset Getting to know your phone Ringer Indicator LED Flashes to indicate new event, e.g. voicemail, TAM and ringing. B Earpiece C Redial / Scroll right / Clear / Mute Open the redial list. Scroll to the right. Delete characters on screen when entering names and numbers. Mute / unmute the microphone during a call. Go back to previous menu level – displayed on screen. D Calls list / Scroll Up / Volume up Open the Calls list.
G # / Ringer off / Pause Press and hold to switch handset ringer on or off. When dialling or storing a number, press and hold to enter a pause (P). Dial a #. L Direct Memory keys Press to call pre-stored number directly. M Menu key Enter the main menu. Select the option displayed on screen. Confirm menu option – OK is displayed on screen. Amplification (Handset receiver) Press to increase the receiving volume through the earpiece when on a call. H Intercom / 0 Press and hold to make a internal call.
Display icons G I On when the line is in use. Flashes when there is an incoming call. Flashes when you have new voicemail messages. Off when you have no voicemail messages. Above function will work only if your network supports. H F J D Flashes when you have missed calls and new number(s) are in the Calls list. Phonebook is open. The alarm clock has been set. Handsfree mode. Getting to know your phone B E Handset ringer is off. Steady when the handset is registered and within range of the base.
Overview of the base 2. Press p again to cancel the paging call or press any key on the handset to stop the paging call. C Charge Red Light ON whenever the handset is placed on the base. Navigating the menus The basic steps of navigating through the menu and onscreen options. 1. From the standby screen, press m. The main menu is opened. 2. Use the u or d keys to scroll through the menu. 3. Soft key options OK and are displayed. Press m to select OK and open a sub-menu or validate an option.
Menu map PHONEBOOK CLOCK/ALARM PERSONAL SET ADVANCED SET NEW ENTRY LIST ENTRY EDIT ENTRY DATE & TIME SET ALARM ALARM TONE HANDSET TONE RING VOLUME RECALL TIME DIAL MODE CALL BARRING EASY CALL REGISTRATION SELECT BASE DELETE ENTRY DELETE ALL DIRECT MEM PB TRANSFER* RING MELODY GROUP MELODY KEY TONE FIRST RING BASE TONE BASE VOLUME BASE MELODY HANDSET NAME AUTO PICK-UP AUTO HANG-UP LANGUAGE ROOM MONITOR BACKLIGHT REGIST. BASE UNREGISTER PIN RESET UNIT PREFIX SEL.
3. Using the phone 3.1 Make a call 1. Press <. 2. Dial the telephone number. 3.2 Pre-dial 1. Enter the phone number (maximum 24 digits). If you make a mistake press e. 2. Press < to dial the phone number entered. 3.3 To make a call using fast call keys 1. Press . or / to dial the pre-stored number directly. NOTE To assign a fast call number, see page 20. 3.4 Call from the phonebook 1. Press d. The first entry in the phonebook is displayed. 2. Scroll u or d to the entry you want. 3.
NOTE If you have subscribed to your Network’s Caller Identity service and assigned a VIP Group to the caller’s number, the caller’s details are displayed before the phone starts ringing (see “Store an entry” on page 17 and “Group melody” on page 25). You can set your phone to give the default ringtone as soon as the call is received then once the caller’s identity is displayed, the assigned ringtone will start. See “First ring” on page 26.
3.10 End a call 1. Press >. After you hang up, the duration the phone is off-hook is displayed for 5 seconds. NOTE If auto hang-up is on (see page 27) simply replace the handset on the base to end the call. The default setting is ON. 3.11 Switch handset on/off • If more than two handsets are registered to the base, their numbers are displayed, e.g. 2345*. Enter the number of the handset you want to call or press * to ring all handsets. 2. Press > to hang up.
3.12.3 Three-party conference call 1. During an external call, press 0. Your caller is put on hold. 2. Enter the number of the handset you want to call or press * to ring all handsets. If there are only two handsets, the other handset is called automatically. 3. When the other handset answers, announce the call then press and hold 0 to connect both calls. If the other handset does not answer, press 0 to talk to your caller again. 4. Press > to hang up. 4.
5. Enter a number. Press m to save. Press u or d to select NO GROUP, GROUP A, B or C and press m to confirm. 6. Press > to return to standby. NOTE You can assign individual contacts to specific groups of your choice. For example, Group A contains phone numbers of all your co-workers. You can also assign a specific ring melody to that group (see “Group melody” on page 25). You can benefit from this feature only if you have subscribed to Caller Line Identification service from your network provider.
1. When storing a number, press and hold # until the display shows P. You can then continue storing the phone number. 4.6 View an entry In standby: 1. Press d. 2. Enter the first letter of the name to search alphabetically then scroll u or d to the exact entry. The name is displayed. 3. Press e to display the number. If there are more than 12 digits, press e again to see the rest of the number. 4. Press > to return to standby. During a call: 1. Press m twice to open the phonebook menu. 2.
3. Display shows CONFIRM?. Press m. 4. Press > to return to standby. 4.10 Copy phonebook to another handset 1. Press m twice. 2. Scroll d to PB TRANSFER and press m. 3. Scroll u or d to the number of the handset you want the phonebook copied to. Press m. On the receiving handset: 3. Scroll u or d to Key 1 (.) or Key 2 (/) then press m. 4. Display shows Key1 . Press m to confirm. 5. Press m to select ADD to assign the fast call number to the key.
5. Caller display and Calls list If you have subscribed to Caller Line Identification (CLI), and provided the identity of the caller is not withheld, the number of the caller will be displayed together with the date and time of the call (if provided by the network). NOTE • If the caller’s number is stored in your phonebook along with a name, the name will also be displayed. • If the telephone number is not available for incoming calls, the handset will display UNAVAILABLE .
5.1.2 Dial from the calls list 1. Press u to open the Calls list. The most recent call is displayed. 2. Scroll u or d to the entry you want. 3. Press < to dial. 5.1.3 Modify and dial a number in the Calls list 1. Press u to open the Calls list. The most recent call is displayed. 2. Scroll u or d to the entry you want. 3. Press m repeatedly until the display shows EDIT ENTRY. 4. Press m again. The display shows NUMBER. 5. Press u or d to move the cursor to edit or delete number. 6.
5.1.6 Delete entire calls list 1. Press u. The most recent call is displayed. 2. Scroll u or d to the number you want. 3. Press m then scroll d to DELETE ALL and press m. 4. Display shows CONFIRM?. Press m to confirm. 5. Press > to return to standby. 5.2 Redial The CD2 lets you redial any of the last 10 numbers called. Numbers can be up to 24 digits long. 5.2.1 Redial the last number 1. Press e. The last number dialled is displayed.
6. Clock & Alarm 6.2 If you subscribe to your network’s Caller Identification service, the time on your CD2 may be set automatically each time you receive a call, depending on your network provider. 2. Scroll d to SET ALARM and press m. You can also set or adjust the time using the Clock & Alarm menu. 6.1 Set date and time 1. Press m and scroll d to CLOCK/ALARM. Press m. Display shows DATE & TIME, then press m. 2. Enter the date using the format DD/MM e.g. 04/ 08 for 4th August. 3.
7. Personal settings 7.1 Handset tones WARNING When the phone is ringing, avoid holding the earpiece too close to your ear as it may damage your hearing. 7.1.1 Ring volume Choose from: Ringer Off, Low, Medium, High, Boost and Progressive (increasing ring volume). NOTE The default setting is High. 1. Press m, scroll d to PERSONAL SET and press m. 2. HANDSET TONE is displayed. Press m. 3. RING VOLUME is displayed. Press m. 4. Scroll u or d to adjust the ringer volume level. 5.
7.1.4 Key tones on/off When you press a key on the handset you hear a beep. You can switch these beeps on or off. 1. Press m, scroll d to PERSONAL SET and press m. 2. HANDSET TONE is displayed. Press m and scroll d to KEY TONE. Press m. 3. Scroll u or d to select ON or OFF. 4. Press m to confirm. 5. Press > to return to standby. 7.1.5 First ring Your CD2 will automatically detect the Caller identification (Subscription dependent).
5. Press m to confirm. 4. Press m to confirm. 7.3 7.5 6. Press > to return to standby. Handset name Personalise your handset, with a name or location for example Peter or Bedroom. Maximum 10 characters. 1. Press m, scroll d to PERSONAL SET and press m. 2. Scroll d to HANDSET NAME and press m. The current name is displayed. 3. Press e to delete the current name. 4. Enter the name you want – maximum 10 characters and press m to save. 5. Press > to return to standby. 7.
7.7 Room Monitor on/off Leave one handset in a room and use another handset to hear sounds in that room. 1. Press m, scroll d to PERSONAL SET and press m. 2. Scroll d to ROOM MONITOR. Press m. 3. Press u or d to select ON or OFF. 4. Press m to confirm. When switched On, you can leave this handset in the room you wish to monitor. Only the microphone is on. Anyone in the room cannot hear you. 7.8 Room Monitor 1. Switch a handset’s room monitor mode setting On and place that handset in the room. 2.
8. Advanced settings 3. Press u or d to select TONE or PULSE . This setting is useful to access certain network and PABX/ switchboard services. 5. Press > to return to standby. 8.1 Recall time 4. Press m to confirm. 8.2.1 Temporarily switch from Pulse to Tone dialling The default CD2 recall time is suitable for your country and network operator. It is unlikely that you should need to change this setting unless advised to do so. 1. Press and hold *.
5. Press u or d to select ON or OFF. Press m to confirm. 6. Press > to return to standby. You can now set the number. (See below) 8.3.2 Set a number to be barred 1. Press m, scroll d to ADVANCED SET and press m. 2. Scroll d to CALL BARRING. Press m. 3. Enter the master PIN (default setting 0000) and press m. 4. Scroll d to NUMBER. Press m. 5. If necessary, scroll u or d to the next available slot. 6. Press m and enter the number or prefix you want to bar. Press m to confirm. 7.
8.4.3 Dial an easy number At the handset: When an easy call number has been stored and the easy call setting switched on, press any key (apart from >), to dial a number. 1. Press m and scroll d to ADVANCED SET and press m. NOTE When easy call is switched on, you can still answer any incoming call as normal. 3. If necessary, scroll u or d to display REGIST. BASE and press m. BASE 1 2 3 4 is displayed and the registered base number is flashing.
3. SELECT BASE is displayed. Press m. The available bases are displayed with the current base number flashing. 2. Scroll d to PIN. Press m. 4. Enter the number of the base you want – 1,2,3 or 4 and press m. When the base is found you hear a beep. If not found, the display shows UNREGISTERED. 4. Enter the new PIN and press m. 8.8 8.10 Unregister a handset 1. Press m and scroll d to ADVANCED SET and press m. 2. Scroll d to UNREGISTER and press m. 3. Enter the 4 digit master PIN and press m.
8.11 Default settings Handset name Key tone First ring Auto pick up Auto hang up Ringer melody Ringer volume Base ringer melody Base ringer volume Earpiece volume Phonebook Calls list Redial list Master PIN Keypad lock Clock Alarm Dial mode Recall mode 8.12 Handset On On On On Melody 1 High Melody 2 High 2 Unchanged Empty Empty 0000 Off 00:00 Off Tone Long (600ms) Auto prefix You can set the CD2 to detect a dialling number and replace it with another number.
1. Press m, scroll d to ADVANCED SET and press m. 8.15 3. Enter the 4-digit master PIN and press m. To reduce the level of power emissions, you can select low power or ECO mode. When the ECO mode is set to ON, the base transmission power will be reduced. 2. Scroll d to SEL. COUNTRY. Press m. 4. Scroll u or d to display the required country. 5. Press m to confirm. 8.14 Intrusion When an external call is taking place, another handset ECO mode To turn ECO Mode to ON or OFF: 1.
9. Help S The icon is not scrolling when the handset is placed on the base • Bad battery contact – move the handset slightly • Dirty contact – Clean the battery contact with a cloth moistened with alcohol • Battery is full – no need to charge No dialling tone • No power – check the connections.
10. General information IMPORTANT This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. This product is intended for connection to analogue public switched telephone networks and private switchboards in Singapore. Important safety instructions Follow these safety precautions when using your phone to reduce the risk of fire, electric shock, and injury to persons or property: 1.
Installation Guidelines 1. Read and understand all instructions and save them for future reference. 2. Follow all warnings and instructions marked on the product. 3. Do not install this product near a bath tub, sink, or shower. 4. Operate this phone using only the power source that is indicated on the marking label. If you are unsure of the power supply to your home, consult with your dealer or local power company. 5. Do not place this product on an unstable cart, stand, or table.
• Never use household polish as this will damage the product. Never use a dry cloth as this may cause a static shock. Environmental • Do not expose to direct sunlight. • The handset may become warm when the batteries are being charged or during prolonged periods of use. This is normal. However, we recommend that to avoid damage you do not place the product on antique/veneered wood.
Consumer Products and Accessories Warranty Thank you for purchasing this Motorola branded product manufactured under license by Suncorp Technologies Limited, 3001-3005 China Resources Building, 26 Harbour Road, Wan Chai, Hong Kong. ("Suncorp") What Does this Warranty Cover? Subject to the exclusions contained below, SUNCORP TECHNOLOGIES LTD.
specific legal rights, and you may also have other rights that vary from one jurisdiction to another. Products Covered Consumer Products Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Consumer Ninety (90) days from the date of Accessories (battery, the accessories original purchase power supply(s) and by the first consumer purchaser of line cords) the product.
How to Obtain Warranty Service or Other Information? To obtain service or information, please call: (65) 68412668. Email: support@alcom.com.sg You will receive instructions on how to ship the Products or Accessories at your expense, to SUNCORP TECHNOLOGIES LTD. It is the responsibility of the purchaser to contact the nearest authorised service center/ distributor and bring the product at the purchaser's risk to that authorised service center.
You may also need to enter a pause when storing international numbers or charge card numbers. Recall You may need to use the recall function if you are connected to a switchboard/PABX (Private Automatic Branch Exchange), contact your PABX supplier for further information.
Declaration of Conformity (DoC) Brandname: Type: DECT phone without telephone answering machine (CD20x) and their multi-handset versions.
Manufactured, distributed or sold by Suncorp Technologies Ltd. , official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2011 Motorola Mobility, Inc. All rights reserved.
