Operation Manual

16 Using the phone
3.10 End a call
1. Press >.
After you hang up, the duration the phone is off-hook is
displayed for 5 seconds.
NOTE
If auto hang-up is on (see page 27) simply replace the
handset on the base to end the call. The default setting is
ON.
3.11 Switch handset on/off
1. Press and hold > until the handset switches off.
2. Press and hold > again to switch the handset back on.
3.12 Intercom
This feature is only available when there are at least 2
registered handsets. It allows you to make internal calls,
transfer external calls from one handset to another and use
the conference option.
3.12.1 Call another handset
1. Press and hold 0.
• If you have two handsets, the other handset is called
automatically.
• If more than two handsets are registered to the base,
their numbers are displayed, e.g.
2345* . Enter the number
of the handset you want to call or press
* to ring all
handsets.
2. Press > to hang up.
NOTE
If the handset does not belong to CD2 range, this function
may not be available.
3.12.2 Transfer an external call to another handset
1. During an external call, press 0.
Your caller is put on hold.
2. Enter the number of the handset you want to call or
press
* to ring all handsets.
If there are only two handsets, the other handset is
called automatically.
3. When the other handset answers, announce the caller
then press
> to transfer the call. If the other handset
does not answer, press
0 to talk to your caller again.