Operation Manual

30 Advanced settings
5. Press u or d to select ON or OFF . Press m to
confirm.
6. Press > to return to standby. You can now set the
number. (See below)
8.3.2 Set a number to be barred
1. Press m, scroll d to ADVANCED SET and press m.
2. Scroll d to CALL BARRING . Press m.
3. Enter the master PIN (default setting 0000) and press
m.
4. Scroll d to NUMBER . Press m.
5. If necessary, scroll u or d to the next available slot.
6. Press m and enter the number or prefix you want to
bar. Press
m to confirm.
7. Press > to return to standby.
8.4 Easy call
When activated, this feature allows you to dial a number by
pressing any key on your handset (except
>). This feature
is very useful for access to emergency services.
8.4.1 Switch easy call on/off
1. Press m, scroll d to ADVANCED SET and press m.
2. Scroll d to EASY CALL . Press m.
3. Enter the master PIN (default setting 0000) and press
m.
4. MODE is displayed. Press m then press u or d to
select
ON or OFF . Press m to confirm.
5. Press > to return to standby.
To switch Easy call off again:
1. Press >.
2. OFF? is displayed. Press m to confirm.
8.4.2 Set the easy call number
1. Press m, scroll d to ADVANCED SET and press m.
2. Scroll d to EASY CALL . Press m.
3. Enter the master PIN (Default setting 0000) and press
m.
4. Scroll d to NUMBER . Press m.
5. Enter the number. Press m to confirm.
6. Press > to return to standby.
NOTE
If you switch Easy call on,
EASY CALL will be displayed on your
screen in standby mode.