Motorola_CD200_IFU_EN_HK.book Page 0 Wednesday, October 12, 2011 5:39 PM Motorola CD2 Digital Cordless Phone For CD201, CD202, CD203 and CD204 Warning Use only rechargeable batteries.
Motorola_CD200_IFU_EN_HK.book Page 1 Wednesday, October 12, 2011 5:39 PM Welcome... to your new Motorola CD2 Digital Cordless Phone! • • • • • • • • • All handsets fully cordless for locating anywhere within range. 100 Name and number phonebook. Copy phonebook entries between other handsets. Caller Display shows you who's calling and see details of the last 50 callers in a Calls list.* Register up to 5 handsets to a single base and register each handset with up to 4 different bases.
Motorola_CD200_IFU_EN_HK.book Page 2 Wednesday, October 12, 2011 5:39 PM This User Guide provides you with all the information you need to get the most from your phone. Before you make your first call you will need to set up your phone. Follow the simple instructions in `Getting Started', on the next few pages. IMPORTANT Only use the telephone line cord supplied. This equipment is not designed for making emergency telephone calls when the power fails.
Motorola_CD200_IFU_EN_HK.book Page 4 Wednesday, October 12, 2011 1. Getting started ................................................6 2. Getting to know your phone ..........................9 3. Using the phone............................................14 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 Make a call...................................................... 14 Pre-dial ........................................................... 14 To make a call using fast call keys .................
Motorola_CD200_IFU_EN_HK.book 5.2.4 5.2.5 Page 5 Wednesday, October 12, 2011 Delete a redial list entry ......................... 24 Delete entire redial list ........................... 24 6. Clock & Alarm .............................................. 24 6.1 6.2 6.3 Set date and time ............................................ 24 Set alarm ......................................................... 25 Set alarm melody ............................................ 25 7. Personal settings .............
Motorola_CD200_IFU_EN_HK.book Page 6 Wednesday, October 12, 2011 5:39 PM 1. Getting started out of range of the base. Move back within in range. The handset will automatically re-connect to the base. WARNING Do not place your CD2 in the bathroom or other humid areas. Setting up Location You need to place your CD2 base within 2 metres of the mains power socket and telephone socket so that the cables will reach.
Motorola_CD200_IFU_EN_HK.book Page 7 Wednesday, October 12, 2011 Plug the mains power cable with the clear connector into the socket marked on the underside of the base and plug the other end into the mains power wall socket and switch the power on. Connecting the handset and charger (Multipack only) If you have purchased a multiple pack, this process will need to be carried out for all handsets and chargers: 1.
Motorola_CD200_IFU_EN_HK.book Page 8 Wednesday, October 12, 2011 Running the batteries right down at least once a week will help them last as long as possible. The charge capacity of rechargeable batteries will reduce with time as they wear out, giving the handset less talk/ standby time. Eventually they will need to be replaced. After charging your handset for the first time, subsequent charging time is about 6–8 hours a day. Batteries and handset may become warm during charging. This is normal.
Motorola_CD200_IFU_EN_HK.book Page 9 Wednesday, October 12, 2011 2. Getting to know your phone Overview of your handset Getting to know your phone A 5:39 PM Ringer Indicator LED Flashes to indicate new event, e.g. missed call. B Earpiece C Redial / Scroll right / Clear / Mute Open the redial list. Scroll to the right. Delete characters on screen when entering names and numbers. Mute / unmute the microphone during a call. Go back to previous menu level – displayed on screen.
Motorola_CD200_IFU_EN_HK.book G Page 10 Wednesday, October 12, 2011 # / Ringer off / Pause Press and hold to switch handset ringer on or off. When dialling or storing a number, press and hold to enter a pause (P). Dial a #. 5:39 PM L Direct Memory keys Press to call pre-stored number directly. M Menu key Enter the main menu. Select the option displayed on screen. Confirm menu option – OK is displayed on screen.
Motorola_CD200_IFU_EN_HK.book Page 11 Wednesday, October 12, 2011 Display icons G I H F J D B E On when the line is in use. Flashes when there is an incoming call. Flashes when you have new voicemail messages. Off when you have no voicemail messages. Flashes when you have missed calls and new number(s) are in the Calls list. Phonebook is open. 5:39 PM The approximate power levels of your battery are indicated as below: S T U U Battery is fully charged. Battery is partially charged.
Motorola_CD200_IFU_EN_HK.book Page 12 Wednesday, October 12, 2011 Overview of the base 5:39 PM Navigating the menus The basic steps of navigating through the menu and onscreen options. 1. From the standby screen, press m. The main menu is opened. 2. Use the u or d keys to scroll through the menu. 3. Soft key options OK and are displayed. Press m to select OK and open a sub-menu or validate an option. and go back to previous Press e to select menu level, correct a character or cancel an action. 4.
Motorola_CD200_IFU_EN_HK.
Motorola_CD200_IFU_EN_HK.book Page 14 Wednesday, October 12, 2011 3. Using the phone 3.1 Make a call 1. Press <. 2. Dial the telephone number. 3.2 Pre-dial 1. Enter the phone number (maximum 24 digits). If you make a mistake press e. 2. Press < to dial the phone number entered. 3.3 To make a call using fast call keys 1. Press . or / to dial the pre-stored number directly. NOTE To assign a fast call number, see page 20. 3.4 Call from the phonebook 1. Press d.
Motorola_CD200_IFU_EN_HK.book Page 15 Wednesday, October 12, 2011 NOTE If you have subscribed to your Network’s Caller Identity service and assigned a VIP Group to the caller’s number, the caller’s details are displayed before the phone starts ringing (see “Store an entry” on page 18 and “Group melody” on page 26). You can set your phone to give the default ringtone as soon as the call is received then once the caller’s identity is displayed, the assigned ringtone will start. See “First ring” on page 26.
Motorola_CD200_IFU_EN_HK.book 3.10 Page 16 Wednesday, October 12, 2011 End a call 1. Press >. After you hang up, the duration the phone is off-hook is displayed for 5 seconds. NOTE If auto hang-up is on (see page 28) simply replace the handset on the base to end the call. The default setting is ON. 3.11 Switch handset on/off 1. Press and hold > until the handset switches off. 2. Press and hold > again to switch the handset back on. 3.
Motorola_CD200_IFU_EN_HK.book 3.13.2 Page 17 Wednesday, October 12, 2011 Transfer an external call to another handset 1. During an external call, press 0. Your caller is put on hold. 2. Enter the number of the handset you want to call or press * to ring all handsets. If there are only two handsets, the other handset is called automatically. 3. When the other handset answers, announce the caller then press > to transfer the call.
Motorola_CD200_IFU_EN_HK.book Page 18 Wednesday, October 12, 2011 4. Phonebook The CD2 handset phonebook can store up to 100 names and numbers. NOTE Numbers can be up to 24 digits long and names up to 12 characters long. Entries are stored in alphabetical order. 4.1 View and dial phonebook entries 1. Press d. Display shows the first entry. 2. Scroll u or d to the entry you want. Or To search alphabetically, press d then press the key with the first letter of the name, e.g.
Motorola_CD200_IFU_EN_HK.book Page 19 Wednesday, October 12, 2011 5:39 PM To enter a space press 1 Press e to delete a character or press and hold e to delete all characters. 1. When storing a number, press and hold # until the display shows P. You can then continue storing the phone number. 4.4 4.6 Character map Use the keypad to enter names and characters. 1 2 3 4 5 6 7 8 9 0 Space 1 - A B C 2 D E F 3 4.5 Enter a pause < > * View an entry In standby: 1. Press d. 2.
Motorola_CD200_IFU_EN_HK.book 4.7 Page 20 Wednesday, October 12, 2011 Edit an entry 1. Press d. 2. Scroll u or d to the entry you want to edit and press m. EDIT ENTRY is dsplayed. Press m again. 3. Edit the name and press m to confirm. Use e to delete characters. m and edit the number. Press m to confirm. Scroll u or d to select NO GROUP, GROUP A, B or C and press m to confirm. Press > to return to standby. 4. Press 5. 6. 7. 4.8 Delete an entry 1. Press d. 2.
Motorola_CD200_IFU_EN_HK.book Page 21 Wednesday, October 12, 2011 3. Scroll u or d to Key 1 (.) or Key 2 (/) then press m. 5:39 PM 5. Caller display and Calls list 4. Display shows Key1. Press m to confirm. If you have subscribed to Caller Line Identification (CLI), and provided the identity of the caller is not withheld, the number of the caller will be displayed together with the date and time of the call (if provided by the network). 6. Press > to return to standby mode.
Motorola_CD200_IFU_EN_HK.book Page 22 Wednesday, October 12, 2011 5:39 PM When you have missed calls (incoming calls that you haven’t icon will be displayed in the display on all answered) the handsets registered to the base. 5.1.2 If one handset is used to view the calls log, the icon on the other handsets continue to flash (Multipack user only). 2. Scroll u or d to the entry you want. H 5.1.1 View the calls list 1. Press u to open the Calls list.
Motorola_CD200_IFU_EN_HK.book 5.1.4 Page 23 Wednesday, October 12, 2011 Save a number from the calls list to the phonebook 1. Press u then m. The most recent call is displayed. 2. Scroll u or d to the number you want. 3. Press m then press d until SAVE NUMBER is displayed. 4. Press m. ENTER NAME is displayed. Use the keypad to enter the name. 5. Press m then the number is displayed, the user can then edit the number if required and must press m to save the number (even if has not been edited). 6.
Motorola_CD200_IFU_EN_HK.book 5.2.3 Page 24 Wednesday, October 12, 2011 Copy a redial number to the phonebook 1. Press e and scroll u or d to the entry you want. 5:39 PM 6. Clock & Alarm 2. Press m. If you subscribe to your network’s Caller Identification service, the time on your CD2 may be set automatically each time you receive a call, depending on your network provider. 4. Enter the name and press m. You can also set or adjust the time using the Clock & Alarm menu. 6.
Motorola_CD200_IFU_EN_HK.book 6.2 Page 25 Wednesday, October 12, 2011 Set alarm 1. Press m, scroll d to CLOCK/ALARM and press m. 5:39 PM 7. Personal settings 2. Scroll d to SET ALARM and press m. 7.1 3. Scroll u or d to OFF, ON ONCE or ON DAILY and press m. WARNING When the phone is ringing, avoid holding the earpiece too close to your ear as it may damage your hearing. Handset tones 4. If you select ON ONCE or ON DAILY, enter the time using the 24 hour format HH - MM e.
Motorola_CD200_IFU_EN_HK.book Page 26 Wednesday, October 12, 2011 3. Press u or d to select the ringtone. A sample of the ringtone is played. 4. Press m to confirm. 5. Press > to return to standby. 7.1.3 Group melody To benefit from this feature, you must subscribe to the Caller Line ldentification service.This menu enables you to select and set the melodies to be played when there is an external incoming call from a contact whose name is stored in your phonebook and is part of a group.
Motorola_CD200_IFU_EN_HK.book 7.2 Base ringer 7.2.1 Ring volume Page 27 Wednesday, October 12, 2011 Choose from: Ringer Off, Low, Medium, High. NOTE The default setting is High. 1. Press m, scroll d to PERSONAL SET and press m. 2. Scroll d to BASE TONE . Press m. 3. Scroll d to BASE VOLUME . Press m. 4. Scroll u or d to adjust the ringer volume level. 5. Press m to save the settings. 6. Press > to return to standby.
Motorola_CD200_IFU_EN_HK.book Page 28 Wednesday, October 12, 2011 4. Press m to confirm. 5. Press > to return to standby. 7.5 Auto hang up With Auto hang up switched on, you can end a call just by replacing the handset on the base or charger. If switched off, you have to press > to hang up. The default setting is On. 1. Press m, scroll d to PERSONAL SET and press m. 2. Scroll d to AUTO HANG UP. Press m. 3. Scroll u or d to select ON or OFF. 4. Press m to confirm. 5. Press > to return to standby. 7.
Motorola_CD200_IFU_EN_HK.book 7.9 Page 29 Wednesday, October 12, 2011 Backlight on/off 1. Press m, scroll d to PERSONAL SET and press m. 2. Scroll d to BACKLIGHT. Press m. u or d to select ON or OFF. Press m to confirm. 3. Press 4. 7.10 Keypad lock Prevent accidental dialling while carrying the handset by locking the keypad. 1. Press and hold *. - The display shows KEYS LOCKED. 2. To unlock the handset, press and hold * again.
Motorola_CD200_IFU_EN_HK.book Page 30 Wednesday, October 12, 2011 5:39 PM 3. Press u or d to select TONE or PULSE. 5. Press u or d to select ON or OFF. Press m to confirm. 5. Press > to return to standby. 6. Press > to return to standby. You can now set the number. (See below) 4. Press m to confirm. 8.2.1 Temporarily switch from Pulse to Tone dialling 1. Press and hold *. The dial mode will change from Pulse to Tone for the duration of the call. 8.
Motorola_CD200_IFU_EN_HK.book Page 31 Wednesday, October 12, 2011 5:39 PM 3. Enter the master PIN (default setting 0000) and press m. 8.4.3 5. Press > to return to standby. NOTE When easy call is switched on, you can still answer any incoming call as normal. 4. MODE is displayed. Press m then press u or d to select ON or OFF. Press m to confirm. To switch Easy call off again: 1. Press >. 2. OFF? is displayed. Press m to confirm. 8.4.2 Set the easy call number 1.
Motorola_CD200_IFU_EN_HK.book Page 32 Wednesday, October 12, 2011 At the handset: 1. Press m and scroll d to ADVANCED SET and press m. 2. Scroll d to REGISTRATION and press m. 3. If necessary, scroll u or d to display REGIST. BASE and press m. BASE 1 2 3 4 is displayed and the registered base number is flashing. Enter the number of the base on which you wish to register your handset. If you have only 1 base station, press 1. If you have 2 base stations, press 1 or 2, etc. 4.
Motorola_CD200_IFU_EN_HK.book Page 33 Wednesday, October 12, 2011 2. Scroll d to PIN. Press m. 3. Enter the current 4 digit master PIN and press m. (Default setting 0000). 4. Enter the new PIN and press m. NOTE Make a note of your PIN. If you forget your PIN you will need to reset your product. 8.10 Reset This will reset your CD2 to its default settings. 1. Press m, scroll d to ADVANCED SET and press m. 2. Scroll d to RESET UNIT. Press m. 3. CONFIRM? is displayed. Press m.
Motorola_CD200_IFU_EN_HK.book 8.12 Page 34 Wednesday, October 12, 2011 Auto prefix You can set the CD2 to detect a dialling number and replace it with another number. The number to be detected can be up to 5 digits long. It can be replaced with a number up to 10 digits. 1. Press m, scroll d to ADVANCED SET and press m. 2. Scroll d to PREFIX . Press m. 3. DETECT DIGIT is displayed. Press m. 4. Enter the number you want to be detected and press m. 5. Scroll to PREFIX NUM. and press m. 6.
Motorola_CD200_IFU_EN_HK.book 8.15 Page 35 Wednesday, October 12, 2011 ECO mode To reduce the level of power emissions, you can select low power or ECO mode. When the ECO mode is set to ON, the base transmission power will be reduced. To turn ECO Mode to ON or OFF: 1. Press m, scroll d to ADVANCED SET and press m. 2. Scroll d to ECO MODE and press m. 3. Press u or d to highlight ON or OFF then press m to confirm.
Motorola_CD200_IFU_EN_HK.book Page 36 Wednesday, October 12, 2011 No ring tone • The ring tone is deactivated. • Increase the volume. Caller Line Identification (CLI) service does not work Check your subscription with your network operator A phonebook entry cannot be stored The phonebook is full. Delete an entry to free memory No display • Try recharging or replacing the batteries. • Try disconnecting and connecting the base power supply.
Motorola_CD200_IFU_EN_HK.book Page 37 Wednesday, October 12, 2011 6. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 7. Do not disassemble this product. If service or repair work is required, contact the customer service helpline found in this user's Guide. 8. Do not overload wall outlets and extension cords. 9. Avoid using during an electrical storm. Use a surge protector to protect the equipment. 10.
Motorola_CD200_IFU_EN_HK.book Page 38 Wednesday, October 12, 2011 5:39 PM 10. To avoid interference to nearby appliances, do not place the base of the phone on or near a TV, microwave oven, or VCR. • Never use household polish as this will damage the product. Never use a dry cloth as this may cause a static shock. Battery Safety Instructions Environmental • Do not burn, disassemble, mutilate, or puncture the battery. The battery contains toxic materials that could be released, resulting in injury.
Motorola_CD200_IFU_EN_HK.book Page 39 Wednesday, October 12, 2011 5:39 PM out trashbin label on the product (or the package in some cases). As defined by the WEEE directive, this crossedout trashbin label means that customers and end-users in EU countries should not dispose of electronic and electrical equipment or accessories in household waste.
Motorola_CD200_IFU_EN_HK.book Page 40 Wednesday, October 12, 2011 What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED.
Motorola_CD200_IFU_EN_HK.book Page 41 Wednesday, October 12, 2011 surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola or SUNCORP, are excluded from coverage.
Motorola_CD200_IFU_EN_HK.book Page 42 Wednesday, October 12, 2011 5:39 PM R&TTE Recall This product is intended for use within Hong Kong for connection to the public telephone network and compatible switchboards. You may need to use the recall function if you are connected to a switchboard/PABX (Private Automatic Branch Exchange), contact your PABX supplier for further information.
Declaration of Conformity (DoC) Brandname: Type: DECT phone without telephone answering machine (CD20x) and their multi-handset versions.
Motorola_CD200_IFU_EN_HK.book Page 0 Wednesday, October 12, 2011 Manufactured, distributed or sold by Suncorp Technologies Ltd. , official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2011 Motorola Mobility, Inc. All rights reserved. Version 2 (HK.
