User’s Guid e 5" Vid eo Bab y Monit or Mod el: COMFORT75, COMFORT75-2, COMFORT75-3, COMFORT75-4 The feat ures described in t his User’s Guide are subject t o m odificat ions w it hout prior not ice.
Welcome... to your new Motorola Digital Video Baby Monitor! Thank you for purchasing the Digital Video Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit 1 3 4 5 2c 2b 2a 1. 2. 3. 4. 5. 6 7 Display (LCD screen) Battery status, Power, Sound level, Pairing indicators a) Lights up in blue when the Parent Unit’s battery is being charged. b) Lights up in green when the Parent Unit is switched on. c) Green-Orange-Red-Red Show the sound level detected by the Baby Unit - the louder the sound detected, the more LEDs light up. Flashes rapidly in green when the Parent Unit is searching for the Baby Unit, or is in pairing mode.
Parent Unit display icons Signal Strength Camera Power Mode - AC or Battery Camera S Patrol Mode Camera Identification Number Speaker on / off Lullabies menu / mode Zoom menu / mode Night vision Alarm timer Parent unit battery status Parent unit brightness Speaker volume Video on timer Add camera .
Overview of Your Baby Unit (Camera) 1 2 4 3 5 7 8 6 1. 2. 3. 4. Camera Lens Microphone Power indicator Lights up in blue when the Baby Unit is switched on and linked to the Parent Unit. Off when the Baby Unit is switched off. Light Sensor (Night Vision Mode) 5. 6. 7. 8. Pair Key Press and hold to pair with the Parent Unit. Power Adapter Socket Temperature Sensor Power ON/OFF switch Slide to switch the Baby Unit on or off.
Table of contents 1. 2. Safety Instructions ..................................................................................... 7 Getting Started........................................................................................ 10 2.1 2.2 3. Using the Baby Monitor........................................................................... 12 3.1 3.2 3.3 3.4 4. 6 Setting Up ..................................................................................................
ENGLISH 1. Safety Instructions WARNING: Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.
BABY UNIT SET UP & USE: • • • Determine a location for the Baby Unit that will provide the best view of your baby in his/her crib. Place the Baby Unit on a flat surface, such as a dresser, bureau, or shelf or mount the Unit to a wall securely using the keyhole slots in the underside of the stand. NEVER place the Baby Unit or cords within the crib.
• Connect the power adapters to easily accessible electrical outlets. CAUTION The Parent Unit includes a built-in, lithium-ion rechargeable battery pack, which is not a user-accessible item. If you think the battery needs replacing, please contact the helpline. Do not try to replace it yourself. Risk of explosion if battery is replaced by an unapproved battery type. Dispose of used batteries according to their instructions.
2. Getting Started 2.1 Power up the Baby Unit ȼˏ Place the Baby unit near a electrical outlet in the room where you’re going to be monitoring your baby most of the time. It should also be at least 3 feet away from your baby. ȼˏ Plug the micro-USB plug of power adapter into the Baby unit, connect other end to a suitable electrical outlet. ȼˏ Slide the Pow er ON OFF switch on the side of the baby unit up to turn it on. IMPORTANT Only use the supplied power adapter(DC5V/ 1000mA).
Charge the Parent Unit ENGLISH 2.2 The Parent Unit com es w it h a b uilt -in Li-ion b at t ery. • Plug t he m icro-USB p lug of p ow er ad ap t er( DC5V/ 10 0 0 m A ) int o t he Parent unit , connect t he ot her end t o a suit ab le elect rical out let . • Leave t o charg e for 16 hours. TIP: The first time you use the Parent unit, or if you haven’t used it for a long time, it’ll take 16 hours to fully charge. The battery life on a single charge lasts for approximately 4 hours.
3. Using the Baby Monitor Please read these instructions carefully, and be aware that this baby monitor is only intended as an aid. It is not a substitute for responsible adult supervision. 3.1 Setting Up • Make sure that the Baby Unit and Parent Unit are both switched on. • Place the Baby Unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor.
Night Vision Mode The Baby Unit has high-intensity infrared LEDs for picking up clear images in the dark. When the built-in light sensor on the side of the Baby Unit detects a low level of ambient light, the LEDs will automatically activate and the screen on the Parent Unit will display in black and white. The icon will be displayed on the screen. Using the Baby Monitor 13 ENGLISH 3.
4. Parent Unit Menu Options 4.1 Adjust Speaker Volume The Parent Unit has 8 volume levels + off. To adjust volume, press the + UP or - DOWN button when the Parent Unit is in camera viewing mode. 4.2 Set the Screen Brightness The Parent Unit has 8 brightness levels. To adjust brightness, press the < LEFT or > RIGHT button when the Parent Unit is in camera viewing mode. 4.
Set alarm You can use the Parent Unit to set an alarm as a reminder for you to take care of your baby. If an alarm time is selected, the Parent Unit will beep at the end of the selected 2, 4 or 6 hour period. The alarm will sound for about 1 minute when the time is reached, or can be stopped by pressing any button. To activate an alarm, proceed as follows: 1. 2. 3. 4. Press the M MENU button when the Parent Unit is in camera viewing mode. Press the < LEFT/> RIGHT button to select .
4.3.5 Set temperature format The t em p erat ure read ing from t he t em p erat ure sensor at t he b ack of t he Bab y Unit w ill b e d isp layed at t he t op of t he Parent Unit LCD screen. You can sw it ch t em p erat ure form at b et w een Cent ig rad e and Fahrenheit as follow s: 1. Press the M MENU button when the Parent Unit is in camera viewing mode. 2. Press the < LEFT/> RIGH button to select , press the O button 3. Press the + UP /- DOWN button to select oC or oF. 4.
View camera If you have more than one camera paired with the Parent Unit, to select the transmission image from a specific camera, proceed as follows: Press the M MENU button when the Parent Unit is in camera viewing mode. 2. Press the < LEFT/> RIGHT button to select view camera icon . appears on the screen. 3. Press the + UP /- DOWN button to select the number of the camera that you wish to view, or the scan icon to view each paired camera in sequence at about 20 seconds interval. 4.
5. Disposal of the Device (environment) At the end of the product’s life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the Product, User’s Guide and/or box indicates this. Some of the product materials can be reused if you take them to a recycling point.
ENGLISH 6. Cleaning Clean your Baby Monitor with a slightly damp or anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals –- this may cause permanent damage to the product which is not covered by the Warranty. • Keep your Baby Monitor away from hot, humid areas or conditions, strong sunlight and avoid moisture.
7. Troubleshooting Power Indicator on the Parent Unit does not come on • Check whether the Parent Unit is powered on. • Check whether the battery is charged. • Recharge the Parent Unit by connecting it to the power supply. The Parent Unit beeps repeatedly • The Parent Unit and the Baby Unit may be out of range with each other. Reduce the distance between the units, but not closer than 3 feet. • The Baby Unit may be switched off. Slide the ON/OFF switch 0 to the On position to switch on the Baby Unit.
• The Parent Unit and the Baby Unit are too close to each other. Make sure the Parent Unit and Baby Unit are at least 3 feet away from each other. • The speaker volume of the Parent Unit may be set too high. Decrease the volume of the Parent Unit. Battery pack in the Parent Unit is running low quickly • The LCD brightness may be set too high. Try to decrease the brightness level. Refer to section 4.2 for details. • The volume level of the Parent Unit may be set too high, which consumes power.
8. General Information lf your product is not working properly.... 1. 2. 3. Read this User’s Guide or the Quick Start Guide. Visit our website: www.motorolahome.com/support Contact Customer Service at US and Canada 1-888-331-3383 E-mail: support@motorolastore.com To order a replacement battery pack, contact customer service.
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Products Covered Consumer Products Length of Coverage One (1) year from the date of the Products’ original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the Accessories’ original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer.
Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage. How to Obtain Warranty Service or Other Information? To obtain service or information, please call: US and Canada 1-888-331-3383 E-mail: support@motorolastore.
FCC and IC regulations FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
The socket-outlet shall be installed near the equipment and shall be easily accessible. Industry Canada This device complies with Industry Canada licence-exempt RSS standard(s): Operation is subject to the following Two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
9. Technical Specifications Baby Unit Frequency 2.4 - 2.483 GHz Image sensor Color CMOS 1M Pixels IR LED 8 pcs Pow er A d ap t er TEN PA O INTERNA TIONA L LTD. S0 0 5BNU0 50 0 10 0 ; Inp ut : 10 0 -24 0 V 50 / 60 Hz 150 m A ; Out p ut : DC5V 10 0 0 m A or, SHENZHEN TIA NYIN ELECTRONICS CO., LTD. TPA -4 6B0 50 10 0 UU Inp ut : 10 0 -24 0 V 50 / 60 Hz 20 0 m A ; Out p ut : DC5V 10 0 0 m A WARNING Use only the supplied power adapter.
Parent Unit Frequency 2.4 - 2.483 GHz Display 5" diagonal TFT LCD Pow er A d ap t er TEN PA O INTERNA TIONA L LTD. S0 0 5BNU0 50 0 10 0 ; Inp ut : 10 0 -24 0 V 50 / 60 Hz 150 m A ; Out p ut : DC5V 10 0 0 m A or, SHENZHEN TIA NYIN ELECTRONICS CO., LTD. TPA -4 6B0 50 10 0 UU Inp ut : 10 0 -24 0 V 50 / 60 Hz 20 0 m A ; Out p ut : DC5V 10 0 0 m A WARNING Use only the supplied power adapter. Do not use non-rechargeable batteries for the Parent Unit.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2018 Motorola Mobility LLC. All rights reserved. US_EN Version 1.
